DIY portable shoe rack

A great option for a simple wooden shoe rack that you can easily make with your own hands from wood. This shelf has a large surface area, which means you can put more of your shoes on it. Also, this shelf is perfect for toys, books, tools, shoes and other things. The shelf is highly mobile, which means that you can put it at any time where it may suddenly be needed.

Shoe shelf carousel (step by step photos, drawings)

You can make such a multi-storey shelf with rotating shelves for shoes using any ready-made cabinet of square base sizes, or you can make the cabinet again yourself.

We fix it motionless in the closet metal pipe, and on it we already install rotating round shelves for shoes. We insert pins into these round shelves for shoes, on which, in our own words, our shoes will be located.
The author of the shelf (who, unfortunately, is not known to us) recommends making two types of round shelves, for 9 pairs of shoes (for children) and 12 pairs of shoes (for adults) (see the drawings in the photo below). So a lot more shoes will fit into the closet and its efficiency will increase.

See step by step photos and manufacturing drawings:

Shelves for shoes From pipes

shoe shelf from pipes.
DIY master class

Let's look at the photo how to make such a metal shoe rack water pipes with your own hands. See step-by-step photos in the photo gallery below.

This shelf will look great at the window, in the bathroom, hallway, living room or kitchen.

Step-by-step photos of the master class:

Floor shelf or table with shelves for shoes in the hallway

Most likely this option applies more to tables than to shelves. But still, we posted this model here, because. We hope that this option of personal organization will be of interest to you, and most importantly, useful, because. When arranging a home, all options must be taken into account !!!

See below step-by-step photos of the master class

Photo Source: dailyinteriordesignblog.com Author Photos: Josh Rhodes and Elsie Larson

Do-it-yourself bench shelf for books or shoes

This shelf bench is also perfect for toys, spare parts or tools in the garage.

We did not lay out the entire process of alteration, because. it is unlikely that you will buy a rack to make a bench out of it. Therefore, we have placed only the most necessary photos, so that you just get acquainted with this option. According to the photo, you can make the same simply from the boards.

We beautifully thread the threads to support books

Photo source: instructables.com.

DIY shoe rack

Put together four planks and making a regular shoe rack is not at all difficult, but what if you add a little zest. How do you like this option? So to speak, three in one, compact, creative, on wheels. Adjust the dimensions of the main and internal shelves as you need, well, mobility, it's very convenient.

Help build this fun shelf with these step-by-step photos

Operating procedure

We decide on the total area of the shelf, this is after we returned from the store with new wheels.
We prepare the material, measure, saw, grind.
We remove the dimensions of the internal shelves and the height of the racks. It all depends on what kind of shoes will be stored on the shelf, everything can be provided, from slippers to boots.
We make blanks according to the sizes, you see how everything is beautifully laid out in the photo.
Drill holes in corners for self-tapping screws
We fasten the details first of the inner shelves, then the main ones.
Four bolt holes are needed for the wheels, they can be made in advance and tighten the bolts at the end.

The shelf is ready, further decorative work is up to you. You can paint, upholster the top shelf with a cloth, this is already to your taste.

Foldable shoe rack

It is known that there are never too many shoes, especially this topic is very relevant for women. But why is it needed, you can probably get by with a conventional, stationary design. The problem, as always, is free space, in a small apartment there is always not enough space, and in the summer, as you know, the number of shoes used doubles. So a folding portable shelf is perfect as an additional place to store shoes for the summer season. Or another option, suddenly guests came to you. In order not to make a dump in the corner of the hallway, just take your folding shelf and order from a secluded corner. In general, a useful thing if you like it, make a folding shelf with your own hands not difficult.

The most common tools are a drill, a jigsaw, sandpaper. The materials are shown in the photo, but it's your choice, boards or plywood, see for yourself. The assembly process is shown in step-by-step photos, everything seems to be clear there. You can read the instructions on the website, link under the gallery. In the photo you can see the shelf in the unfolded and folded state. According to the author, if all the tools and materials are available, it will take a maximum of two evenings to make the shelf.

Photo source www.instructables.com/id/Folding-Shelves

Shelf bench for shoes

It will not be difficult for you to make such a simple wooden shelf in the hallway with your own hands. See step by step photos below on how to do it. The shelf of the bench is suitable in the hallway for shoes, in the bathroom, in the nursery for toys, in the room for books, magazines and newspapers.

Photo source: howtospecialist.com

Shelves for shoes from boxes

Do-it-yourself shoe rack made of wooden boxes

Another option for a shoe rack wooden boxes, which you can do with your own hands.

This shelf is perfect for toys, tools in the garage, for shoes, flowers (if you knock out the back wall of the drawers), as well as for other household items.

Below you can find a step-by-step master class for making this shelf.

Photo source: instructables.com.

How to make a shelf out of shoe boxes - no nails

This will probably be the easiest shelf you have ever made.. So, you need to find five boxes and a can of paint. Then take a brush and paint the container in the color that best suits your interior. When the paint dries, everything, the shelf is ready.

You just have to decide how to put them. If there are small children in the house, the structure, of course, must be connected with bolts or self-tapping screws, or even better, attached to the wall, so it will be safer and more reliable. But if there are no children, then there is no need to fasten, the boxes are strong enough. And the main advantage you can change the shape of the structure at least every day. Imagine, every day you have a new shelf and no nails.

So, for example, today you have a pyramid, and tomorrow a ladder, according to your mood.

Folded in solid construction, very convenient to store shoes. For a change, you can pick up one box and fold whatever you like.

Well, what do you think?
Photo source creatingreallyawesomefreethings.com

Do-it-yourself corner shoe rack in the hallway.

Let's see how to make a simple wooden corner shelf With rounded shelves to your apartment. This shelf is suitable for books, magazines, for shoes in the hallway, for soap accessories in the bathroom, for tools in the garage, as well as for kitchen utensils in the kitchen.

Photo source: howtospecialist.com

Shelving rack made of cardboard boxes do it yourself step by step

Watch the master class on how to make this shoe rack from the photo above.

Minuses:

not very reliable
not tight

Pros:

cheap
simply

This design uses two types of boxes

these are the large shelves that are made of
these are narrow, from which drawers are made

All boxes are fastened with ordinary tape.

Advice:

light things should be placed on the upper shelves, larger and heavier things on the lower ones.
when you cut large boxes, as shown in the pictures, then from these scraps you can make additional shelves for small items inside the shelves, for this you just need to make cuts in the trim and connect the trim with a lattice.
Also, these trimmings can be used as additional supports inside the boxes, in problem areas.

Photo source: wikihow.com

Cardboard shoe rack

This is the most simple furniture you ever did. I represent do-it-yourself master class on making cardboard shoe racks , an irreplaceable thing for new settlers. In short: we make three equal strips of cardboard, push them through so that they bend well, you can use a blunt knife. Tape the sheets on one side. We make triangles from sheets and fasten with tape. Fix the resulting triangles with glue on a sheet of cardboard. The pyramid can be made in any size , how many triangles you make, this will be. Fasten another cardboard sheet on top, this will be the top shelf. Anyone can do this kind of thing. It will come in handy before buying a locker so that the shoes do not roll around anywhere.

But that's not all, if there is very little space, can be done hanging shelf for shoes from cardboard, it's even easier. It is necessary to make such a rectangle from a sheet of cardboard, as in the photo. Choose the size yourself, depending on what kind of shoes you will put there. Then again lay out the box, and using it as a template, cut the blanks. Then make as many pockets as you need, insert them into each other and fasten them with tape at the back. The shelf can be hung on the wall or on the door.

Of course for winter shoes not a very good option, but in the summer it is very convenient, save a lot of space.

Secret door - closet and shoe rack

Let's see how to make a secret door in an apartment, for example, in a closet, in a dressing room, in a wall.

If you want to make a secret room, or hide some unsightly part of the apartment to make it look more aesthetic, then follow the step-by-step photo instructions below.

Don't use loops because your the design must withstand up to 450 kg! The author of the photo advises using bolts as hinge pins, which should be welded into the frame.

IMPORTANT fix the frame strictly vertically, for this you should use a plumb line. Attach the top mount to the ceiling first, then plumb the bottom mount. (see photo).

See step-by-step photos of production:

Don't forget to install wooden fence above the door (see photo). Attach a magnet to this stopper to keep the door pressed against the wall. Be careful when choosing a magnet, it should not attract too much and not too weakly.

IMPORTANT!!!: according to the rules fire safety: all entrances to rooms containing ovens or gas stoves and gas pipes must be clearly visible.

Photo source: wikihow.com

Unusual shoe racks

do it yourself

As the theater begins with a hanger, so any apartment with a hallway. Shelves for shoes are not just a useful piece of furniture, they are part of the interior design, so if you are a fan of creative solutions, you can start surprising guests from the hallway. In this collection you can see some interesting ideas unusual shelves for shoes .

Schemes and drawings of shelves for shoes

A shoe rack is not a wardrobe or a sofa, it is easy to make it yourself. It is much easier to do this if you already have a project ready.. Of course, you can draw a sketch yourself if you have experience in this matter, but it’s easier to use ready-made schemes, why reinvent the wheel.

For example, according to this scheme, making a cabinet for shoes is not at all difficult

There are many types of shoe shelves - the main ones include Bona, Slim, Coupe, Stand, or a shoe cabinet - a shoe cabinet.

For the manufacture of some of them, various mechanisms are often needed, but today it is not a problem to buy any accessories in a furniture store. Often to save space use shelves "slim", although they have design features, but if desired, such a shelf can be made independently. Of course, it is quite difficult to make it yourself, you have to buy a lot of different accessories. It's easier to buy ready-made and assemble it yourself. You can see how this is done in this detailed diagram.

In this collection, you can see diagrams of various types of shelves If you have experience with wood structures, these drawings can help with proportions and dimensions.

Save space !

When planning the interior of hallways, one problem most often arises - not enough space. To save some space, you can go for different tricks, for example, here is one of the ways, though only for women's shoes with thin heels. This feature of women's shoes can be used. At a distance of 5 centimeters, attach a long handrail to the wall and the shoes will be held solely by the heel.

If such an original shelf is beautifully decorated, it looks very original

from beer diy for shoes

Let's look at how to make a shoe rack (rack) from beer glass bottles with your own hands. If you already have four beer bottles (or champagne) and two boards, then consider that you have already done half the work. Of course, in addition to this, you will also need inexpensive fasteners that can be bought at almost any hardware store.

Choose beer bottles with a long neck.

Boards for shelves are sanded and covered with dark varnish.

Surprisingly, these glass bottle shoe racks are durable because they can support the weight of an adult.

By placing one such shelf on top of another, you will get a shoe rack made of glass bottles.

See step-by-step photos of the master class:

The source of the photo could not be established (((

250+ photos

We learn about the huge variety of shelves for only when we start looking for a suitable option for milking our hallway. Closed and open, one, two and I don’t know how many tiered, hanging, floor, wall - in general, very different. For an idea, check out this gallery

And these are just a few of the options.

Shoe rack, she is also a shelf for storing shoes, should be in every home, otherwise the hallway will reign chaos. Putting the shoes on a special shelf or putting them in a drawer, you maintain order and cleanliness in the house, protect the shoes from the encroachments of pets. Furniture stores offer a wide range of similar designs, but it is not always possible to choose the right option for the interior, or the cost of production is prohibitive. In this article, we will look at several options for creating a stylish and functional shoe rack with your own hands.

The most important requirement for a shoe rack is the ability to accommodate the daily shoes of each family member. That is, a modest small locker is suitable for a bachelor, and for a family of 3-4 people, the size of the shoe rack should be appropriate. The main problem of shop models is that most of them were made in China, where, as you know, they have a weakness for everything miniature and compact. In this case, compactness is not synonymous with ergonomics, so you have to pick up a hammer, boards and learn how to make a shoe rack with your own hands.

Another drawback of almost all shoe cabinets offered by stores is the complete lack of ventilation. Imagine this situation - you returned home on a rainy autumn Friday evening, took off your shoes, put your wet shoes on the shelf and set out to spend the whole weekend at home. By Monday, when you have to go to work again, wet leather shoes will look very deplorable. Ventilation is essential to keep shoes in good condition and extend their lifespan.

So, what qualities should an ideal shoe rack have:

Ergonomics - a shoe cabinet should not occupy half of the hallway.
Functionality - this includes the concept of spaciousness and use for other purposes. For example, you can sit down on a locker (the role of a stool), put things (the role of a bedside table), and a shoe rack with a mirror will become a kind of dressing table.
The presence of good ventilation - we do not hint that fans should be installed inside the cabinet and pipes should be laid, it is enough just to ensure the flow of fresh air in a natural way.
Aesthetics - appearance and the design of the shoe should be in harmony with the interior.

All the schemes of shoe racks described below fully comply with these requirements.

Shoe dryer

This shoe rack will appeal to lovers of simple and practical solutions. The classic hanging dish rack was taken as the basis. Why not? The design does not stand on the floor, so you can easily clean up under it. The shelves are not solid, but in the form of lattices of of stainless steel, which means that water or melted snow will calmly flow through the bars of such a metal shoe, they can be quickly washed by wiping with a rag. Such furniture looks quite original and minimalist - no extra bulky doors, legs and decorative elements. This option is perfect for a high-tech apartment and loft.

Helpful Hint: If pets live in the house, it is still better to make light doors to protect shoes. To do this, use glass or plastic.

The best thing about doing it yourself is that you can set any size. So, when drawing up a shoe rack, consider which shoes you use most often. For example, if a fisherman with a size 45 lives at home, who uses high rubber boots every other day, then the dimensions of the shelf should be appropriate. The upper part of such a “dryer” can be taken away for slippers or light shoes. Dirty or wet shoes should not be placed there so that the shoes on the floor below do not suffer.

To make such a cabinet, you don’t need to buy a whole sheet of chipboard at all - ordinary furniture panels are enough. They can be found in any building supermarket, while the shields are already completely ready for assembly - they are glued with an edge and sawn into equal parts. We will specifically not write the exact height and width of the shoebox so that you create an individual drawing for your home.

The second thing to take care of is metal meshes. They are also sold in construction stores. The standard mesh widths are 46.4 cm, 56.4 cm, 76.4 cm and 86.4 cm, but custom nets can be ordered (it will cost a little more). If you choose shelves with a maximum width of 86.4 cm, then the external dimensions of the cabinet for 4 shelves will be as follows (HxWxD): 120x 90x 34 cm. A depth of 34 cm is enough to fit size 45 boots there.

An important point: To increase the functionality and compactness of the shelves, place them at an angle inside the cabinet. So the water will drain in a given direction, and the cabinet will take up a minimum of space.

What parts are needed to assemble a shoe rack:

sidewalls 118.4x 32 cm - 2 PC(standard furniture board for the manufacture of wardrobes);
facades 119.5x 44.7 cm - 2 PC(you can buy straight boards made of laminated chipboard or figured MDF facades);
top cabinet cover 90x32 cm - 1 PC;
tsargi 86.8x 10 cm - 2 PC(also sold in furniture stores);
back wall 119.5x 89.5 cm - 1 PC(it is better to make it from thin and cheap hardboard).

It remains only to buy the necessary fasteners and assemble a shoe cabinet. You don't even have to cut anything - all the finished parts are already on sale!

Fittings and fasteners required for shoe dryers:

confirmat 5x 70 mm - 8 PC;
metal furniture corner - 8 PC;
self-tapping screws 4x16;
furniture hinges 4-hinged – 4 PC;
dowels and front handles - at your discretion.

To work, you will need ordinary toolsthat can be found in the house of every owner - a drill, a screwdriver, a hammer.

How to assemble a shoebox:

With help confirmations pull the sides to the sides of the future shoe rack. In the sidewalls for the confirmations, drill through holes 8 mm in diameter, in the end parts of the tsarg, also make holes with a diameter of 5 mm and a depth of 55 - 60 mm. Drill so that the holes line up exactly.
Screw half of the number of corners to the top roof, and use the remaining 4 instead of wall fasteners, attaching them to the back of the sidewalls.
Screw all parts with self-tapping screws. Before fixing the hardboard, check the evenness of the geometry of the box - its diagonals must be equal.
Measure on the vertical sides of the facades 15 cm above and below and 2.2 cm deep. At the marked points, make holes for furniture hinges with a diameter of 3.5 cm.
Install the doors and screw on the handles.
Hang the locker 12-15 cm from the floor so that you can tidy up under it. The distance between the bottom and second shelf must be at least 35 cm to fit boots.

Helpful Hint: In rainy or snowy weather, place a drip tray under your shoe rack to keep water from dripping onto the floor.

compact shoe rack

In this chapter, we will describe step by step process creating a very original, miniature and elementary shoe rack. It will suit any interior design, and even children can be involved in the decoration process. Shoes on such a shelf look very neat, and it is simply impossible to create a heap there.

With the creation of such narrow shoe rack even someone who has never held carpentry tools in their hands can handle it. You don't even have to ask your neighbor for a hacksaw - just draw up a drawing with the right dimensions and ask to cut the boards in the same building store where you bought them! The only thing you can't do without when assembling is a drill.

To build a compact shoe rack, you will need the following tools and materials (we provide dimensions for a design that will suit a bachelor or a young couple):

the simplest long shoe brushes with stiff bristles 160 x 40 mm - 3 - 5 PC(depending on the length of the future shoe rack);
moisture resistant plywood 12 mm thick: 1020x 370 mm - 1 PC(A ); 1020х 90 mm - 1 PC(V ); 1020x130 mm - 1 PC (WITH) ; 90x 118 mm - 1 PC(D); 1020x 60 mm - 1 PC(E);
spikes 6 mm - 6 PC;
wood screws;
building glue for wood;
acrylic paint;
moisture resistant transparent varnish;
brush;
dowels.

You can decorate the shelf not only acrylic paints, even the usual one will do gouache if it is then immediately opened with a transparent varnish. If you want to do without varnish, use enamel. And if you like a beautiful wood texture, you can simply cover the shoe rack with clear varnish, lightly tinted with stain.

How to make a shoebox:

Assembly should begin with an element containing brushes. Drill 6 through holes in the edge of the plywood B.
Insert six spikes smeared with glue into the holes obtained.
in plywood WITH make exactly the same holes, coat it with glue and connect it to plywood B. It would be best to compress these elements with clamps until the glue is completely cured, or simply place some kind of load on them.
Glue the sides of element D in the same way to the resulting structure. After each glue application, firmly squeeze the parts to be glued.
With a hacksaw, saw off the handles of the brushes, if any (it is better to immediately buy the cheapest brushes without handles).
Drill 2 through holes in each brush and screw them 1 cm from the edge of the structure with short self-tapping screws so that the caps are on the inside of the brushes.
Make through holes with a drill in the unused parts of elements A and E, as shown in the image below.
Using self-tapping screws, connect all parts of the shelf to the end.
Paint the shoe rack the color you want or paint different colors. In our case, we got a solid bright green design, but you can ask the younger family members to participate in the process or paint the plywood yourself. If there are no abilities for fine arts, you can do decoupage or assemble a mosaic.
It remains only to drill holes in the wall for dowels and hang the shoe rack.

Shoe rack made of PVC pipes

Finally, we have prepared for you the most unusual and exciting master class on creating (let's not be afraid of this word) creative shoe rack in the hallway. With such a design, you can always keep your house clean and tidy, and even children will be happy to put their shoes “in the house”.

What is this wonderful shoe rack made of? You will be surprised, but these are the most common sewer pipes from polyvinyl chloride, which are available in any modern city apartment. They cost much less than high-quality wood or moisture-resistant plywood, while they are distinguished by an almost eternal life and ease of installation.

For one such shoe rack, you will need one sewer pipe 300 mm in diameter. The standard length of such a product is 3 m. To make a roomy and deep enough compartment for an adult’s shoes, 30 cm is enough. This means that as many as 10 shelves will be obtained from one pipe.

Cutting a PVC pipe is not difficult. To do this, you can use a regular hacksaw with a fine tooth. Mark the surface with a marker and divide into 10 equal parts. Each piece of pipe On the one side process sandpaper to smooth out sharp edges. The second end will adjoin the wall, so grind it not necessarily.

Since such round posts very much resemble stumps or logs, we decided to decorate them accordingly - by making an imitation of birch bark. Of course, it was possible to draw it, but it is much easier and faster to paste over the pipes with wallpaper with a suitable pattern. You can decorate the shoe however you like. For a monochromatic "gray" hallway, shelves of bright saturated colors are suitable; for a modest square, it is better to slightly shade the shoebox by painting it black or dark brown color. Before painting, it is advisable to degrease PVC so that acrylic or gouache lays evenly.

It remains only to glue all the pieces with epoxy glue. First, glue 4 pieces horizontally, laying them on a flat surface. For a more secure fixation, press them together with clothespins or clips, which can be removed after the glue has set.

Glue the next 3 blanks onto 4 pipes, and then the rest like a pyramid. In fact, the sequence of gluing and the number of pipes in the rows may vary at your discretion. Epoxy glue is very durable, and if you glue the pipe well with it, it will not fall off even at an angle or on weight. So this is a great opportunity to dream up.

An alternative way to create a do-it-yourself shoe rack from PVC pipes in video format:

Shoe rack: photo

There are a lot of options for shoe racks, but if you don’t know what to start from, go to the nearest furniture store and take one of the proposed models as a basis. You can turn an ordinary "boring" shelf into a functional shoe rack with a seat, a mirror, a hanger, or additional drawers for brushes and creams. But before going shopping, we suggest you be inspired by the following photo selection:

How to assemble a shoe rack (shoe cabinet) should be known to every person who is going to purchase this necessary piece of furniture for the corridor. Often the instructions are included, but still more often you have to navigate on the spot. Usually the whole process takes no more than a few hours, but there are exceptions.

Shoe cases themselves were very popular in the late 19th and early 20th centuries. They could be found in almost every house in a wide variety of options: from ordinary boards or solid wood. Currently, they are just an element of decor that fits perfectly into the interior of any hallway, and besides, they allow you to store shoes as compactly as possible, no matter how much they are.

Assembly process

For work you will need:

level;
roulette;
cordless screwdriver;
screwdrivers;
hammer.

During the purchase in the store, it is advisable to ask the seller if there are any special nuances during assembly. Such features can be expressed in the attachments of the hinges, the locking elements (if any) and the propulsion system, if any. The whole assembly process is concluded in 4 points:

When unpacking, you should be extremely careful and careful not to damage any of the parts (the box must also remain intact, because if there is a marriage inside, it will serve as a guarantee that the marriage was factory). After unpacking, all parts are carefully checked for defects and recalculated. If possible, this process is carried out while the forwarder (delivery service) has not yet left the premises. Such an approach with witnesses from the seller will completely secure the purchase in the event of a marriage.
Large pieces of furniture are assembled at home exclusively on the floor. If there is a carpet in the room, then it is better to twist it, so as not to clean it again later (and it is very tiring to look for small accessories in the carpet). The process takes some time, so it is better to do it on a weekend or at sunset, when there is nothing else to do. Care should be taken to the presence of walls around, so as not to damage anything, and cardboard or other dense material is lined on the floor.

For assembly, the circuit is not required, even if it is available, because everything is always intuitive. During assembly, special screws for chipboard are usually used, for which holes are made in advance (no self-respecting manufacturer will allow himself to sell unprepared material). With the help of short nails, the back wall is fixed (sometimes also on screws). After everything is assembled, you need to close the excess metal with plugs, which are also included.
With the help of the level, everything is checked thoroughly. If irregularities are detected, then it is quite possible to remove the plug and hold on or align the required element.

Taking care of a heap of shoes is problematic. So that the shoes do not get dirty, do not suffer from dampness and dust, you need to install. The easiest way is to purchase a ready-made solution, but this is not always possible.

Here we will consider an alternative route - the manufacture is not simple, namely shoe racks with my own hands. We have to pick up tools and materials, determine the size and internal structure. At the end you will find diagrams, drawings and photographs.

The amount of material and a set of tools will depend on the chosen design. To make a wooden cabinet, you will need the following tools:

drills (confirmed, 5 or 8 millimeters);
tape measure (gon, ruler) and pencil;
hammer;
screwdriver (can be replaced with a drill);
4 mm hex key;
awl;
Forstner drill;
template (its task is to mark up for drilling).

Of course, if you are going to make a cardboard shoe rack, the set will be different. But more on that later.

Do you want a more durable and cheaper shoe rack? Use chipboard sheets as material. In addition, you will need accessories:

pens;
euro screws;
shoe rack mechanism (if any);
screws;
decorative supports (you can do without them, but with supports the structure will look more solid).

For the carousel shelf, you will need metal pins (round shelves are attached to them) and a vertical pin. You don't need any special tools other than a drill. The full list of materials for the "carousel" looks like this:

round pins (holders);
disks from fiberboard;
plastic tips;
steel tube;
metal corners;
screws (plus lock washers to them);
half a liter of primer;
machine screws (together with nuts and washers);
acrylic paint.

More comfortable solutions are also possible (along with leather upholstery). Read about it below, as well as about the sizes of DIY shoe racks.

Product dimensions

The dimensions of the product depend on the area of \u200b\u200bthe hallway and the needs of the owner. Lonely people will have enough of a small locker that is attached to, and a family of 3-4 people needs a full-fledged shoe rack designed for 20-30 pairs. Shop models often turn out to be made in China, whose inhabitants have a strange penchant for miniaturization.

Shoe cases can be wide. It’s hard to make a cabinet or make it yourself, so it’s better to limit yourself to a simple cabinet. The product requirements are:

functionality;
ergonomics;
good ventilation;
aesthetics;
spaciousness.

For a minimalist shoe-dryer, you do not need to allocate a lot of space. Quite small-sized and unpretentious wall model. Options can be:

facades (shaped boards MDF or DIRECT chipboard) - 119.5x44.7 centimeters;
sidewalls (standard) furniture boards) - 118.4x32 centimeters;
back wall (thin hardboard) - 119.5x89.5 cm;
drawers (can be purchased at furniture stores) - 86.8x10.

There are also more compact solutions. Most of them are mounted on the wall of the hallway or placed inside the closet ("carousel"). The dimensions of such structures are much smaller.

To choose the perfect option for your hallway, we recommend using special design programs - you can download and install them on your computer. There are also finished projects, including diagrams, drawings and detailed tables with lists of parts.

Photo of a shoe cabinet in the hallway with your own hands

How to make your own shoe rack

Exists different types homemade shoe designs to optimize the space of the hallway. Some of the solutions are quite complex - for example, a carousel shoe rack. We will not follow the path of complication and will deal with the simplest schemes of shoe cabinets made of cardboard and wood.

Let's consider an example of manual assembly of a narrow shoe rack for a bachelor's apartment. This design is designed for a small number of shoe pairs, and during assembly you will need a drill, a hacksaw and a screwdriver. Here is a list of materials you will need:

moisture resistant plywood (five sheets of 12 mm thickness);
long shoe brushes (the number depends on the length of the shoe, the bristles must be stiff);
wood screws;
spikes (6 pieces of 6 mm each);
acrylic paint;
building glue (for wood);
brush;
transparent moisture resistant varnish;
dowels.

The shelf can be painted with gouache or acrylic - this is not essential. The brushes here act as shoe holders. The assembly order is as follows:

A block with brushes is assembled. Through holes are drilled in the plywood edge (6 pieces).
Spread the spikes with glue and insert into the resulting holes.
Similar "holes" are made in plywood C, which is connected to sheet B. You can press the parts with clamps - then the glue will grab faster.
Element D is attached to an existing structure.
Handles are sawn off from the brushes (you can buy brushes without handles - it will be cheaper).
A pair of through holes are drilled in the brushes, after which they are attached along the entire length of the structure (a centimeter from the edge) using short self-tapping screws.
Unused parts A and E are drilled.
All fragments of the shelf are fastened with self-tapping screws.
The penultimate touch is the painting of the shoe rack. Small family members can be involved in the process. Decoupage and other creative experiments are welcome.
The hallway wall is being drilled. Dowels are placed, the shelf is suspended.

We have also prepared for you some useful videos that will teach you how to create shoe racks with your own hands.

narrow shoes - the best solution for small hallways? If you don't believe me, watch the following video:

The following video will also tell you how to assemble a shoe rack with your own hands:

Do you want a shoe rack for more comfortable taking off your boots? Then the following video will definitely come in handy for you:

From cardboard, you can create hanging and floor shoes with your own hands. The hanging shelf is made of thick, high-strength cardboard; demi-season shoe pairs can be stored in it. You will need an unnecessary box (it’s easy to beg for this in stores) and other things:

furniture knife (can be replaced with large scissors);
wood glue;
large adhesive tape;
Ruler and pencil;
stapler (staples to it should be large in size).

The cardboard is laid out flat surface, after which you divide it (with a pencil) into several rectangular sections. The height will be 30 centimeters, and the length is comparable to the width of the cardboard. The rectangle is divided in half and bent - the side walls must be scored with equal triangles (the vertices will look down).

By bending the rectangles, you form drawers. Glue their edges with tape - in order to protect against moisture. The drawers are inserted into the grooves of the "neighbors" and fixed with wood glue - this is how you get a single structure. Attach hooks on top and fix the product on the wall.

The floor shoe rack is formed in a similar way, but it is not attached to the wall.

The downside of this solution is its extreme instability. Cardboard is a lightweight material, so floor shoes can be knocked over by hitting the edge of the coat.

Shoe box made of cardboard

from wood

Using wood and metal slats as the main components, you can build a fairly stable shoe that takes its place in the hallway. You can save money by replacing the tree with chipboard or fiberboard. The thickness of the sheets should be about one and a half centimeters.

You will also need special slats made of stainless steel. The shape of the bars is cylindrical. In total, you need to get eight of these parts.

Please note: the cross-sectional diameter of the slats is equal to two centimeters. Fasteners and clamps will also come in handy (flanges and screws). And here is a list of DIY tools:

pencil and ruler;
screwdriver;
Sander;
jigsaw;
nails;
compass;
hammer.

So, how to make a wooden shoe cabinet with your own hands? The process begins with cutting out the back and side walls. Usually the height of the shoe rack is arbitrary, and the width is 23 centimeters. This will allow you to make a two-tier shoe rack.

The back wall is cut out at the very beginning - it will consist of a pair of thin planks. The width of the shelf should be 20 centimeters. After cutting out the fragment with a jigsaw, it is necessary to sand the edges and take care of the side walls.

First you need to mark a couple of rectangles of the same type. With a pencil, compass and ruler, mark the front roundings. Roundings are cut with a jigsaw, then the walls are ground and fastened into a single section.

The final assembly of the shoe rack with your own hands. Here is the procedure:

Flange attachment points are marked.
By means of planks, the side walls are fastened together.
The back walls are nailed to the reverse side (end) of the sidewalls.

If desired, the scheme can be complicated. As an option, replace chipboard with wood and upholster the upper part with leather.

Photos of shoe racks that were created with your own hands

White color Simple and tasteful Old pallet Bench Eco-style

Drawings, diagrams, photos

Going from general descriptions to visualized specifics. We have placed all the schemes and drawings of the structures described above in this section. Here you will also find photos of finished shoe racks and individual assembly steps.

Below we have prepared for you drawings, diagrams and photos that will tell you how to make a shoe rack in the hallway with your own hands.

DIY shoe cabinet drawings

Low pedestal
open cabinet

How to do do-it-yourself shoe cabinet In the article we will consider the manufacturing steps.

Muddy spring and autumn, dusty summer, winter, which makes special demands on uniforms - and now several pairs of shoes do not have enough space in the corner of the corridor.

In contact with

classmates

Why is it more practical to do it yourself

It is always easier for a non-professional to buy a shoe locker than to make it. However, there are a number of nuances:

First, the range inexpensive shelves often scarce.
Secondly, the sizes of shelves in stores do not correspond to a rational calculation. The foot of the average resident of the CIS is still much larger than the Chinese, who supply most of the inexpensive furniture, suggest.
In addition, the height of the shelves is almost always the same. This is not entirely logical, since in winter people wear boots with high tops.

It is better to have one shelf with a higher height or hooks on the sides of the shelf to adjust the height yourself depending on the season.

What to consider when choosing materials and components

Is it difficult to make a standard shoe cabinet? The obvious answer is no, it's not difficult. It is necessary to take into account a number of nuances before completing the drawings, purchasing material and starting assembly.

Let's take a look at the most important details Your future shoe cabinet:

Note: buying one standard sheet of chipboard and sawing it as a result is more expensive than ordering in a furniture store / production exactly the number of parts and the dimensions that you provide in the drawings.

shelves do not have to be made of wood. Take a closer look at the type of shelves on the dish dryer. Lattice metal shelves - this is the best option;
chipboard - a material that combines cheapness and functionality. Laminated sheets are sold in many furniture stores and small industries;
the back wall of the cabinet can be made of hardboard - pressed cardboard, which is often used in furniture production.

Designer's Notes

In order for the design of the locker to be practical, you need to take into account the features of storing shoes and correctly calculate the dimensions of the shelves:

the bottom of the cabinet should not be covered by anything, otherwise water will collect inside;
shoes need ventilation. This may be several holes in the sidewalls, if the cabinet is planned to be closed (with doors);
the depth of the shelves should correspond to the length of the box from the largest pair of shoes in the house.

How to calculate cabinet dimensions

Shoe cabinet sketch

Provided that the largest pair of shoes in the house is 42 sizes, i.e. 27 cm long, the shelf should have a “depth” with a margin - say, 28 cm.

Depending on the size of the shoes, the size must be varied. The large side of the shelf depends on the number of pairs of shoes that need to be put:

collect all the shoes that you plan to put in the locker and measure how much space it takes in a row;
consider the designed number of shelves (3 or 4);
put a small margin in the width of the shelf.

Chipboard thickness - 16 mm. Accordingly, the outer width of the cabinet will be 32 mm larger than the width of the shelf.

What will you need

It is worth noting that the sizes below are calculated based on the fact that the maximum shoe size is 42nd.

External dimensions of the cabinet: height - 1200 mm, length (depth) - 320 mm, and width - 900 mm. It is necessary to choose sizes so that they are close to the dimensions of standard parts that are in every furniture store.

In this case, the set of necessary parts is as follows:

4 lattice or chipboard (to your taste) shelves 864 mm wide and 280 mm deep;
top cover standard size 900 by 320 mm;
side walls with a height of 1184 (taking into account the thickness of the top cover of 16 mm, the height of the cabinet will be) and a length (“depth”) of 320 mm;
frames (small parts made of chipboard) with a height of 100 mm and a width of 868 mm for fastening the structure at the back and front, called drawers;

Useful advice: a rope can be pulled over the last shelf in order to fasten the tops of the boots with the help of small clothespins: this way they will not break.

figured facades (improvised doors) made of MDF with a height of 1195 mm and a width of 447 mm (2 doors plus a margin of 4 mm for easy opening);
fiberboard sheet with a height of 1195 mm and a width of 895 mm for the manufacture of the rear wall;
4 hinges for furniture;
2 door handles;
8 confirmations (5 by 70 mm). Confirmat - a special furniture screw for fastening cabinet elements;
self-tapping screws 16 by 4 mm - it is better to take with a margin, a few dozen;
adjustable shelf holders: 4 for each shelf.

Connection technology

The shoe cabinet is assembled in the following order:

Holes in the side walls for inserting confirmations must be made with a diameter of about 8 mm, and at the ends of the tsarg frames - with a diameter of 5 mm. Drilling depth - half the length of the furniture screw.
The rigidity of the locker will give metal corners. You will also need them if you are attaching finished structure to the wall.
Hinges for facades, corners, the back wall must be fixed with self-tapping screws.
Attach shelf holders, handles for facades and hang shelves.
You can put the locker on the floor so you can sit on it when you put on your shoes, but it's better to hang it up and find another use for the countertop.

Useful advice: if everything is in order with ventilation, then it will be dry enough in the locker and you can also hide the Internet connection in it. Then a Wi-Fi router will stand on top of the tabletop.

If you spend some time designing and creating drawings, then your locker will turn out to be much more practical and cheaper than the products of Chinese craftsmen.

We offer to see detailed video how to make your own shoe cabinet: