Owners of suburban areas are interested in the answer to the question of how to determine the aquifer when drilling a well. During the work process, you can stumble upon several deposits of water before you get to what you need.
The top layer is called verkhovodka. It is located at a depth of 6 meters and is formed as a result of rain and melting snow. This water is not suitable for drinking; it is used for irrigation.
The second and third layers carry clean and usable liquid. The second layer is located at a depth of up to 18 meters, and the third up to 40 meters (details). The aquifers are surrounded on both sides by clay or lime, the thickness of which reaches several meters.
Let's look at ways to determine water
Among the effective ways to determine water in a site are the use of silica gel, a barometer, and the reconnaissance method or observation of plants.
More details about them:
Looking at the sand
How to recognize the aquifer when drilling a well will be determined by the quality of the sand. Fine sand indicates the surface layer. The deeper, the coarser the sand and resembles gravel.
The first water that appears in the well is not considered drinking water. Therefore, drilling should continue until the second formation appears. The top and bottom of the water carrier are determined using the drilling speed. The drill enters the water layer gently. In addition, underground water can be under pressure and when it is opened, it flows upward in a fountain.
Drilling water wells requires a certain amount of responsibility. Only a specialist can accurately determine the required water carrier. Therefore, we recommend that you do not hesitate and order their services. This way you will save yourself time and nerves.
Loading...