Modern materials for flooring, which have appeared on the market, open up new possibilities for decorating floors not only in residential premises, but also on terraces, balconies, gazebos, patios, technical structures, as well as arranging paths in open spaces of suburban areas.
- a relatively new type of product. They are made from different materials, and they are intended for various premises. Natural wood, polyvinyl chloride, rubber, and composite materials are used for their manufacture.Such coatings consist of individual modules, which are most often square in shape, although some of them are produced in the form of other shapes, sometimes very complex geometrically.
You can choose a coating consisting of modules for every taste. So, it could be:
Garden parquet or decking made of different types of thermowood or wood materials in combination with polymers;
Rubber tiles with locks - mainly used in technical rooms;
Tile from crumb rubber, produced without locks and attached, most often, to glue;
PVC tile ( polyvinyl chloride), suitable for residential and public premises, as well as for covering areas on the street.
In order to choose the right coating and know for sure how it can be laid, it is necessary to understand in detail the characteristics and installation technology of each of them.
Garden parquet
Garden parquet is a surprisingly comfortable material that can refine floor surfaces and serve for a very long time. It is produced in the form of a tile, which can have a size of 30 × 30, 30 × 50, 50 × 50 cm.
It is sometimes also called decking, since it is often produced in the form of deck or decking, which can have a ribbed or smooth surface. The ribbed board makes the surface non-slip, which is very important for covering terraces and stair steps. The board is produced in lengths from one and a half to six meters, therefore, it is convenient to install in many cases.
garden parquet
Using garden parquet
The quality of this parquet allows you to use it for laying:
Paths around the indoor and outdoor pool;
Garden paths;
Open and closed terraces and balconies;
In the premises of baths and saunas;
Bathrooms;
In the kitchens.
Module design
This coating is made up of separate modules, consisting of two layers:
The lower one, made of polyvinyl chloride in the form of a mesh, on which fasteners are made for the upper layer and for fastening the tiles to each other;
Upper, consisting of individual removable lamellas made of natural wood or from sawdust mixed to bind the material with polymers.
The lamellas are fixed on the PVC lattice at a certain distance, which allows moisture not to linger on the surface, flowing down to the base under the coating.
Materials used and their manufacturing technology
1. Natural wood
As mentioned above, lamellas are often made from natural wood. Usually, for this, solid precious woods are selected, such as teak, kempas, azobe, kumaru and mahogany. These trees grow in tropical humidity and are therefore a moisture resistant material in themselves.
But it should be noted that thanks to these positive characteristics garden parquet has a fairly high price. To make the material more accessible, such well-known types of wood as larch or cedar are also used for the production of lamellas.
But even the strongest and highest quality wood will not withstand the long-term influence of high humidity on it and ultraviolet rays, therefore, the material undergoes special processing.
Wood for the manufacture of garden parquet is placed in a hermetically sealed chamber, where it is doused with hot steam, thereby removing excess moisture from it and making it durable and waterproof. After these procedures, the material will not swell from moisture and will not dry out from hot direct ultraviolet rays. Due to its resistance to external influences, the coating will not change its color or deform even after many years of use.
2. Composite material
In addition to natural wood, a wood-based composite material is used for the manufacture of lamellas, which is called a polymer-wood composite. It consists of finely processed sawdust mixed with thermoplastic. The resulting material has high moisture resistance, strength and low thermal conductivity.
Materials for production are taken in the ratio: 65-80% of crushed wood and 35-20% of polymer, therefore such a composite can be safely called almost wood.
Installation of modular garden parquet
Installation of garden parquet and decking is quite simple, and this is a clear advantage of the material, since even an inexperienced master can handle this work.
1. Garden parquet
Garden parquet can be laid on different surfaces - it can be sand, gravel and soil, but a concrete base is best for it. If natural surfaces are selected on the site, then it is recommended to cover them with geotextiles so that the grass does not grow through the parquet.
Laying modules on concrete or ceramic tiles does not require special training. The main thing is that the surface is flat.
Installation is carried out quickly enough, you can easily cope with it alone and cover several square meters in just a couple of hours.
Parquet modules do not require additional devices or fasteners for connection, since they are fastened together by means of locks on the lower layer of the tile. If the parquet module needs to be shortened, it can be easily cut with a conventional hacksaw. The same is done if you need to remove a small part of the lamella so that it fits well, for example, around a pipe or along a curved wall line.
2. Terrace board
- For laying a modular decking board, transverse joists are required, which are fixed to a rigid base at a distance from each other 40 -
50 cm. When laying, the lags should have a slight slope so that water can drain from the surface, and this must be calculated in advance. Can be lagged one side place a rigid material such as ceramic tiles.
terrace board
- For laying a modular decking board, transverse joists are required, which are fixed to a rigid base at a distance from each other 40 -
50 cm. When laying, the lags should have a slight slope so that water can drain from the surface, and this must be calculated in advance. Can be lagged one side place a rigid material such as ceramic tiles.
- Metal clips are installed in the grooves located at the ends of the boards, which are then screwed to the logs.
- After that, the next board is installed with a groove in the clips, and this is how the entire flooring fits.
- If boards made of composite material were used, and they have cavities inside, then plugs should be installed on the sides, which will give the flooring an aesthetic completeness, and also prevent water and dirt from getting inside.
Video - features of the modular coating "garden parquet"
Modular PVC coverings
Modules made of polyvinyl chloride are a durable and reliable coating that is not afraid of mechanical stress. Therefore, it is often used in technical buildings with heavy floor loads such as garages, workshops or warehouses. In addition, the modules are well suited for office premises, for places with high traffic intensity, as well as for hospitals, kindergartens, outdoor areas and seasonal summer cafes.
Material advantages
- Resistance to low and high temperatures - its operation is possible in conditions from - 28 to +55 degrees.
- Resistant to chemicals, oils, salts and mechanical stress.
- Easy and quick installation of panels, which does not require the use of additional materials and extensive experience in this work.
- The room can be used immediately after the installation of the floor covering.
- Resistance to shock and other dynamic loads.
- The covering made of PVC modules does not require special preparation of the base for it - the main thing is the strength and evenness of the surface.
- Simple and easy dismantling of tiles if they need to be transferred to another base.
- Ease renovation works in the event of damage to several modules, it is enough to replace only the deformed ones, without disassembling the entire coating.
- The environmental friendliness of the material allows you to use it in preschool and school institutions.
Preparation of the base
When preparing the base for PVC modules, you do not need to remove paint and oil stains from it, you do not need to dismantle the old coating, dry it from moisture, or, conversely, moisten it. It is enough to carry out a number of minor and not labor-intensive activities:
- Clean the surface from rough and large protrusions, remove any nails and crutches.
- Fill up holes, cracks and unnecessary holes.
- Clean the surface from dirt, shavings, sand, construction debris, preferably collecting dust with a vacuum cleaner.
- If there is a possibility of moisture getting on the base under the coating, then before laying the modules, the surface must be treated with an antiseptic solution.
Installation of modular PVC cover
Installation can be carried out on any leveled surface, and only a wooden hammer is needed to lay the material.
Installation of modules starts from the corner of the room. A gap of 6 ÷ 12 mm must be left between the wall and the coating, which will serve to compensate for the expansion of the material during thermal changes. After the completion of the work, the gap is closed with a plinth to complete the look.
For modular tiles on the side adjacent to the wall, the connection locks are cut off with a jigsaw.
The tiles are interconnected by locks, which are called " dovetail"- they are located at the edges of the module. The lock of one tile is installed without distortions into the lock of the other and gently tapped from above with a wooden hammer until the modules are completely connected.
If the last slabs to be laid do not fit into the floor area, then they are also adjusted by cutting off the excess part with a jigsaw.
Modules can be stacked without offset, i.e. the solid plate is attached to the solid plate. If you use two colors, you get a kind of checkerboard.
They can also be laid with displacement of the modules of the next row in relation to the previous one - in this case, a "brickwork" pattern is obtained. If just such an option is conceived, then the modules are laid in this order and the lock element located at the corner of the slab with the middle of the other is joined, as if outlining its location. Then one part of the castle is hammered into another. When the two modules are docked, then the work will go easier.
Using modules of different colors, you can lay out an aesthetic pattern on the floor, which will decorate the room.
modular PVC coverings
Is it difficult to maintain such a coating?
Caring for the modular coating will not be difficult. Fine debris, dust and sand should be regularly removed from the surface by simple sweeping or with a vacuum cleaner.
Wet cleaning can be carried out using detergents, and remove greasy stains with degreasing compounds.
In technical rooms, the surface is often treated with acrylic-based polish, which will give the coating a special effect.
Types of relief drawings
PVC modules for flooring have different relief patterns, from which you can choose the one you need for a particular room.
This relief is called "grain"
The relief presented is called "grain" and is often chosen for installation in workshops and garages, as well as in production halls. Its advantage for laying in these areas is that the drawing is not deep and it will be easy to clean up debris and dust. At the same time, the surface is not slippery and is pleasant to walk on.
Coating PVC with "coin" relief
Another popular design of the module is the "coin". These slabs are available in a variety of vibrant colors and can be easily applied to a children's outdoor playground or indoor playground. The floor covering from such modules will give the room brightness and make it fun. In addition to the decorative effect, the coating has a number of other advantages specifically for children's institutions, and the most important of them are environmental friendliness and the fact that it is not slippery, which means it is safe.
Shallow relief, like "orange peel"
The orange-peel-like coating is often referred to as “orange”. It can often be found in gyms and gyms, as well as in the production halls of food enterprises. This choice is justified by the fact that the relief on the modules not deep, and they do not collect a large amount of dust, so this floor is easy to put in order.
Shagreen surface - excellent anti-slip properties
Somewhat reminiscent of the relief of an orange peel and the "shagreen" texture, which is used in gyms, corridors of medical institutions, physiotherapy rooms, shops and in the workshops of some enterprises.
Modular tiles with a universal pattern can be used in any premises, from children's playrooms to exhibition halls, from fitness clubs to office buildings, as well as in all public and industrial premises.
In addition to the relief patterns presented, there are others, from which you can choose any one to your liking.
Video: features of modular PVC coverings
Rubber modular covers
Rubber modular coatings are used in many indoor and outdoor areas - tennis courts, playgrounds, garden and park paths, as well as other places of work and recreation.
Several types of rubber modular flooring are used for flooring in garages and workshops. They perform their functions perfectly due to their positive qualities.
With some admission, special tiles or blocks, panels that are made of crumb rubber can be attributed to modular coatings. Raw materials are obtained from from crushed rubber obtained by recycling old products, such as recycled car tires.
The crushed material is supplemented with colorants and stabilizers, and from this mass tiles or panels are formed. The shape can be rectangular, have a complex configuration, inherent paving slabs, as well as repeat the shape by counting their curvilinear forms, precisely fitted to each other (puzzle).
If the tile has locks, then it does not require special preparation of the base - it is enough that the surface is even. Materials such as sand, gravel, small stone, soil or concrete are suitable for the base.
Rubber tiles, which have the usual square shape, but do not have clutch locks, are laid only on a flat, sufficiently smooth surface and planted on an adhesive mass.
Positive qualities of the material
Good heat and sound insulation;
Strength and durability;
Resistant to moisture and ultraviolet light;
Wear resistance, withstands high mechanical loads;
Environmental safety, no odors;
Resistance to chemically active liquids;
Easy to care for the coating;
Ease of repair (it is enough to replace one or more damaged segments);
The surface is not slippery and pleasant to walk, which is very important in winter and autumn-spring periods.
Video: a reliable floor in the garage made of rubber modules
If it's time to update the flooring in the garage, or if it is decided to lay paths in the garden area, insulate the play area in the children's room or improve the floor on the balcony or terrace, then better coverage than modular cookers, you will not find. Moreover, of all modular floor coverings on the market, you can always find the one that will suit your liking.
Modular floors have appeared on the construction market relatively recently, but have already gained fame for technological and high-quality solutions for floors of any type. Modern modular coverings are used to decorate floors on balconies, porches, lobbies, terraces, playgrounds and sports grounds, garages, warehouses and industrial premises.
Main advantages:
- increased strength,
- resistance to dirt and dust, moisture and precipitation,
- high wear resistance,
- incombustibility,
- resistance to chemical attack,
- the ability to withstand heavy loads,
- reducing the level of vibrations in the room,
- noise absorption,
- ease of installation and dismantling.
Modular coating Erfolg
Created for the arrangement of garden and personal plots, eco-parking, as well as for any outdoor playgrounds intended for sports activities. Football fields, tennis courts, basketball, volleyball and badminton courts, roller-skating tracks, children's multifunctional playgrounds, landscaped with a modular plastic floor covering, look great and do not wear out and fade over a long period of time. Garden plots look great thanks to the robust, elegant and practical Erfolg modules.
Coverage from InterEco
It has anti-slip and antislip properties and is therefore actively used for equipping steps and porches.
The shop of modular coatings of the company "INTEREKO" presents a huge selection of materials for the arrangement of floors in any premises. PVC and plastic modules floor coverings for the street - modern solution for interiors and open areas. Modular anti-slip and antislip coverings are also on sale.
Cooperation with us is the most low prices and Better conditions sales, wide range and high quality products!
Technological progress in all areas of life has led to a curious phenomenon: previously complex processes have become available even to amateurs. Work on the installation of floors of any type has always required special knowledge and certain qualifications. Today, the production of modular floor coverings has been launched, the installation of which can be handled by any layman. PVC tiles are designed according to the principle of children's puzzles. A wooden or rubber hammer is enough to connect them into a single canvas.
Composition and construction of PVC tiles
Like all ingenious, PVC flooring is a very simple, but surprisingly durable and reliable material. The usual tile thickness is from 5 to 7 mm, it consists of 3 layers:
- The base is made of polyvinyl chloride, to which quartz sand and fiberglass are added.
- The film on which the drawing is applied.
- Covering from transparent protective plastic.
Tiles-modules are produced in the form of squares of different sizes, with side lengths of 33, 50 and 61 cm. To ensure a reliable and easy connection into a single whole and the device of monolithic polymer coatings, they are equipped with locks: T-shaped and in the form of a dovetail.
Why do modern consumers choose PVC flooring?
Indeed, why choose vinyl tiles for your floor when there are many other proven options - wood, concrete, polymers? This question is asked by people who are not familiar with the merits of PVC tiles:
- harmlessness- polyvinyl chloride is an environmentally friendly material; syringes for injections are made from it;
- water repellency- the tiles are intended for use in conditions of high humidity, they are used to decorate the floors in greenhouses, to lay the covering around the pools, to be laid in the bathrooms;
- heat resistance- the material does not deform with temperature changes, therefore it is successfully used for the installation of warm floors, and is also laid on garden paths, in barbecue areas and on the verandas of summer cottages;
- ease of repair- if one of the tiles for any reason is out of order, to replace it, it is enough to remove the unusable one and install a new one, all the work takes a minimum of money and time;
- ease of cleaning- to ensure the cleanliness and freshness of the floor covering, ordinary wet cleaning by hand or a special machine is sufficient.
These advantages are important for consumers planning to use tiles for domestic purposes: soft carpeting in bedrooms, fancy color combinations in hallways and living rooms, water-repellent coating in bathrooms and kitchens, green grass and comfortable, clean paths in summer cottages.
The best floors for manufacturing
For industrial facilities with increased requirements, where it is necessary to install monolithic polymer coatings, modular tiles are invaluable due to their qualities:
- high mechanical strength - the ideal composition of the material from which the tile is made allows it to be used in any industry where there are large mechanical loads on the floor surface, frequent point impacts, the movement of heavy vehicles;
- resistance to abrasion - the durable composition of the top layer prevents the formation of scratches and scuffs, it is laid in crowded places, in the halls of train stations and airports, in shopping centers;
- chemical resistance - in hazardous industries with increased requirements, aggressive substances are used that can damage the coating. PVC tiles are especially appropriate here, they are used in car services and garages, in chemical plants and in laboratories, they are resistant to alkalis, acids and salts; after cleaning with cleaning compounds and special solvents, not a trace remains of them;
- good sound absorption - the viscous structure of the material is capable of damping noise, therefore, the modular coating is laid in factory workshops with an increased noise level, this provides additional comfort and convenience for workers;
- quick installation - the modular coating is assembled so quickly that the technological process that takes place in the room is not interrupted.
For industrial facilities, one of the main criteria is the mechanical strength of the coating, modular tiles fully comply with this requirement. To make the workflow more comfortable, manufacturers have launched the production of commercial tiles in different shades.
Down with boring gray floors in factories and workshops! PVC floor coverings are available in any color scheme, they create psychological comfort at work. An additional convenience of such a dirt-protective coating is that it is easy to clean; the use of any chemical solvents is not capable of damaging its surface.
Main characteristics
- Type of locking connection: T-shaped, "dovetail", "studs", hidden.
- Tile thickness: 0.5-1.6 cm.
- Sizes of modules: from 25x25 to 50x50 cm.
- Material weight: 3.3-12 kg.
- Material density: 1.3-1.4 g / cm3.
- Hardness of PVC tiles: 45-94 Shore A.
- The range of temperatures at which operation is possible: from -30 to +50 degrees.
Disadvantages of modular coverage
Unfortunately, no constructors have been created yet construction material completely free of flaws. Modular tiles also have them:
- the need for careful preparation of the base for laying - it must be perfectly flat;
- material of manufacture - synthetic;
- relatively short service life - up to 10 years.
Their list, in comparison with their advantages, is so short and insignificant that it does not in any way affect the choice.
The use of PVC flooring - from the suburban area to industrial floors
Modular PVC tiles are so universal material that it is successfully used as a floor covering for premises of any purpose and even for arranging open paths and areas. Depending on the area of application, modular coatings are classified as:
- commercial and semi-commercial - such tiles are laid in industrial premises and in places with high traffic intensity, they are particularly durable and resistant to abrasion;
- specialized - tiles intended for installation in sports halls, coatings with an anti-slip surface, with fire-resistant or antistatic properties;
- household - floor coverings for houses or apartments, they are laid in the premises of schools, kindergartens and hospitals, this is an excellent option for restaurants, cafes and other catering establishments.
The main criterion for choosing a tile is its purpose. The designers have thought out all the nuances that affect its use: anti-slip coating for street version, heavy-duty for industrial facilities and wholesalers, beauty and environmental friendliness for houses and apartments. In addition, orthopedic coverings are produced, with the help of which foot massage is carried out easily and naturally, tactile tiles for orientation in the space of the visually impaired, floor coverings that are ideal for gyms and sports halls, playgrounds and courts.
A designer's paradise
In terms of design, PVC flooring is fundamentally different from vinyl tiles, which in recent Soviet times were pasted over the floors in typical apartments. The appearance of the new tiles is nothing like the dull monotonous tones of the materials of the Soviet period. Modern modular flooring features vibrant colors in all shades of the palette, they can be monochromatic or decorated with geometric patterns.
There are options that exactly imitate noble parquet and rare marble. Do you want to create an artificial turf or a small football field on the site? On sale there is a tile with the texture of young grass, laid on a prepared base, it will perfectly cope with the task. If the shower requires a soft continuous carpet in the bedroom, such a rug, durable and easy to clean, is assembled from the corresponding tile-modules.
Installation of modular tiles - sequence and features
Before starting the installation, it is required to remove the old coating, completely repair the surface on which the floors will be laid. All cracks, potholes and chips are putty, if necessary, make a new screed. The modular coating is mounted on a leveled, cleaned, dust-free and primed base.
The assembly starts from the middle or from the corners of the room. The tiles are easily connected to each other with simple locking systems, the joints just need to be slightly fixed with a rubber hammer. If it is necessary to cut the tiles to size, this is done with a jigsaw or a carpenter's knife. The tightness of the coating is provided by the cold welding method, in which vinyl glue is injected into the tool joints with a special needle.
Thanks to this procedure, the coating acquires compliance with the increased requirements for operation in high humidity conditions, it is laid in car washes, when arranging pools, in showers. Good chemical resistance allows the use of modular tiles, connected in a sealed surface, in car services, repair shops, chemical industries and laboratories, wherever there is a possibility of exposure to the floor of gasoline, acids, salts.
Polyvinyl chloride dirt-resistant coating is quickly cleaned of dust, dirt, oils and any chemicals, is easy to clean and does not lose its original bright colors.
All these beneficial features attract buyers who want to renew the floors in a house or apartment, improve country cottage area the device of comfortable paths, soft rugs in the pool area. Not less often, modular tiles are purchased by entrepreneurs for the purpose of installing clean, comfortable and functional floors in factories, shops, warehouses, shopping centers.
NPP GC offers you modular PVC and polypropylene floor coverings. Modular floor coverings made of modern materials have a number of advantages over traditional types of floor coverings:
- Fits on any flat base, even an inclined one.
- It is installed quickly and easily (1 worker - 100-200 m2 per day), while the premises can be continued to operate.
- Non-slip, which is especially important for rooms with high humidity
- Possesses high noise insulation properties
- Well dampens vibrations from operating equipment.
- Possesses high resistance to mechanical stress, alkalis and acids.
- Does not support combustion.
- Easily removed and installed during renovation, it can be easily carried from one room to another.
SENSOR modular floor
|
||||
| Coating name | up to 100 sq. | from 100 sq. | from 500 sq. | from 1000 sq. |
|---|---|---|---|---|
| Covers 7 mm, Z-lock (dovetail) | ||||
| SENSOR TECH modular coating (7 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR RICE (7mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR AVERS (7mm) 500х500 |
negotiable |
|||
| Threshold Z-lock (7 mm) per piece | ||||
| Coverings 7 mm, T-lock | ||||
|
negotiable |
||||
|
negotiable |
||||
|
negotiable |
||||
| Modular covering SENSOR STIKS (7mm) 500x500 Promotion !!! | ||||
| Threshold T-lock (7 mm) per piece | ||||
| Covers 5 mm, Z-lock (dovetail) | ||||
| SENSOR TECH modular coating (5 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR RICE (5 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR AVERS (5 mm) 500х500 |
negotiable |
|||
| Coverings 5 mm, T-lock | ||||
| Modular covering SENSOR EURO (7 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR BIT (7 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR SIGMA (7 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR STIKS (7mm) 500х500 |
negotiable |
|||
| FACTOR series coatings | ||||
| Modular coating SENSOR FACTOR (6 mm) 375х375 |
negotiable |
|||
| Modular coating SENSOR FACTOR (8 mm) 375х375 |
negotiable |
|||
| Modular coating SENSOR FACTOR (10 mm) 375х375 |
negotiable |
|||
| Modular covering SENSOR FACTOR Sport (14 mm) 375х375 |
negotiable |
|||
| Dirt protection | ||||
| Modular covering OPTIMA (9 mm) 250х250 |
negotiable |
|||
| Modular covering OPTIMA (16 mm) 250х250 |
negotiable |
|||
| Modular covering OPTIMA DUOS (16 mm) 250х250 |
negotiable |
|||
| Pool and shower cover | ||||
| Modular coating AQUA 250x340 |
negotiable |
|||
| Covering for wet areas | ||||
| Modular coating CANAL (14 mm) 375х375 |
negotiable |
|||
| Tactile tiles | ||||
| PVC tile 300x300 diagonal, stripes, squares, coins |
160 per piece |
negotiable |
negotiable |
negotiable |
| Tile TPU 300x300 diagonal, stripes, squares, coins |
290 per piece |
negotiable |
negotiable |
negotiable |
* when purchasing more than 1000 sq. m. prices are negotiated additionally
|
Basic colors of Sensor series PVC modular coatings |
|||||||||||||
Modular floor M-Tile (Russia)
Modular PVC floor coverings of the M-Tile series (Russia)
| Coating name | up to 100 sq. | from 100 sq. | from 500 sq. | from 1000 sq. |
|---|---|---|---|---|
| Modular covering JETON (7mm) 500х500 |
negotiable |
|||
| Modular covering HARD STEEL (7 mm) 500х500 |
negotiable |
|||
| Modular covering HARD STUDDED (7 mm) 500х500 |
negotiable |
|||
| Modular covering SPORTLINE (7 mm) 500х500 |
negotiable |
|||
| Modular covering UNIVERSAL (5 mm) 500х500 |
negotiable |
|||
| Modular covering DIAMOND (7 mm) 500х500 |
negotiable |
|
Surcharge for M-Tile cover color (base color gray) |
|||||||||||||||
Modular floor for a country house
|
||||
| Hidden lock coverings | ||||
| Modular coating SENSOR SECRET TECH (7 mm) 500х500 |
negotiable |
|||
| Modular covering SENSOR SECRET AVERS (7 mm) 500х500 |
negotiable |
|||
| Modular covering VEROPOL COM (6 mm) 408х408 Promotion !!! |
negotiable |
|||
| Modular covering VEROPOL PROF (7,5 mm) 500х500 Promotion !!! |
negotiable- |
|||
| Modular covering VEROPOL BASE (6 mm) 500х500 |
negotiable |
|||
| Modular covering VEROPOL STONE (7 mm) 500х500 |
negotiable |
|||
Loading ...