How and from what to make a cool table with your own hands
Many people dream of decorating the interior of their apartment with exclusive and interesting designer pieces of furniture. A huge number of such interior items are presented in stores, but the prices for them are often simply fabulous. If you try a little, you can do some things yourself. For example, from various materials at hand, excellent coffee tables are obtained, which will become a real decoration of any interior and a source of pride for homeowners.
Side table in nautical style
In order to make your own coffee table in a nautical style, you will need an old window frame, which must first be cleaned of dust and dirt. Then, if necessary, insert new glass into the frame, clean the surface of the structure from paint and process sandpaper... The surface of the frame should be coated acrylic paint or white enamel.
To make the legs, you will need a shank, which must be cut into 4 equal parts. To remove all roughness and irregularities, sand the surfaces of the legs with sandpaper. As a basis, you can use furniture board or a board whose width does not exceed the width window frame... The legs are attached to the base using long self-tapping screws. Also, the base with the legs is attached to the frame with self-tapping screws.
Since the frame is an empty transparent box, which can be filled with the attributes of a marine theme: pebbles, shells and souvenirs brought from rest. In order for the table to have a complete look, its legs can be braided with a thin rope.
Suitcase table
The original table will also turn out from an old suitcase. For such a piece of furniture, you will need to purchase furniture legs. They can be both metal and wood. If you use special casters, you can get an original model of a mobile coffee table. You will also need a screwdriver, screws and a piece of plywood for work.
First of all, it is necessary to cut a rectangle out of plywood, the dimensions of which must correspond to the width and length of the bottom of the suitcase. Plywood is placed on the bottom of the suitcase and the legs are marked. Using a screwdriver and screws, the legs are attached to the base of the suitcase. Then felt is glued to the base, inside the suitcase. The table is ready.
There are many different options transforming an old suitcase into a coffee table. By choosing the right legs, the table can be made in a classic or retro style.
Log table
Making a table from logs is also not difficult at all. To do this, you need small logs of approximately the same thickness and height (32 pieces). You should also prepare the base for the table, 4 wheels for furniture or legs, putty, glue suitable for wood, and a screwdriver.
First, you need to make a base for the table, along the perimeter of which there will be logs. The middle of the warp is sewn up with cardboard. Legs or castors are attached to the underside of the base. In order for the table to appear completely made of logs, small round dies must be glued to the surface of the cardboard. All voids formed between the dies are covered over and carefully rubbed over to create a smooth surface of the table. You can decorate such a table with branches.
Instead of a large number of small logs, you can use one thick cut of a log to make a coffee table in this way.
Pallet table
Even the most common pallets that can be found on each make an excellent coffee table. For work, you need to prepare:
Wooden pallets;
Hammer;
Drill;
Nail puller;
Clamps;
Glue;
Screws;
Screwdriver;
Legs or castors;
Primer;
Soap.
First of all, the surface of the pallets must be cleaned of dirt. To do this, you can use a drill with a wood attachment. Also, with the help of a nail puller, you should get rid of old nails and disassemble the pallets to pieces. All damaged and broken pieces of boards must be glued together. Gently clamp the boards with the clamps and let them dry well. Then glue the prepared parts of the countertop on the reverse side and again with clamps. After complete drying, the surface of the table must be covered with a layer of primer and then varnish. It is necessary to attach wheels or legs to the back of the resulting table. In order to make it easier to attach the screws to the table, their surfaces can be rubbed with ordinary soap.
After all the work done, you will get a functional, stylish and compact table.
DIY cool table ideas photo
The table is the second item after the stool that every novice amateur furniture maker should be able to do. The table can be created from different materials and possess unique characteristics... It is a great intention for you to want to make your own piece of wood.
A table made of wood is quite easy to create with your own hands, it is enough to have minimal skills in working with carpentry tools. And the cost of the material will be significantly less than the cost of a table using metal, glass or plastic.
A piece of furniture made by your own hands will correspond as closely as possible to the desires of a happy owner, and it will delight the eye incomparably more than what was acquired. And most importantly, when creating a table with your own hands, you acquire important skills in working with the material, which will make the restoration of operational defects much easier.
What can make a good table
Especially beautiful countertop can be made from cheap non-varietal pine boards, knotty and twisted (without dropping out knots, rot, fungus, wormholes), which, if well processed, give a wonderful pattern, to achieve which, when working with an expensive tree, you need to make much greater costs and efforts.
When choosing a material, it is important to take care of the strength of the future product. To do this, you should pay attention to the density of the wood.
Soft (spruce, pine, chestnut, dogwood) is easily damaged during operation, which negatively affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.
Hardwoods (beech, ash, maple, oak, walnut, fruit trees, elm) are difficult to handle on their own. And you may have to look for masters to work with them. But provide the product with durability.
External characteristics
It is very important to determine in advance for yourself the appearance of your future product. The basic rule of a good table is considered if the structure fits well into the space allotted for it and leaves a lot of free space for those sitting.
It is also important to consider that a table with a rectangular top will accommodate fewer people than a table with a round or oval shape with the same area. And the table for guests will be more expedient to be made in a folding version, which is expanded for big holidays, but in everyday life it is folded. Also, such a folding table will be convenient in the backyard.
Most often, you need to choose a kitchen table. It should be roomy and pleasing to the eye, to facilitate the process of working with him. But it should not interfere with movement in the room and in no way interfere with the process of culinary creativity.
Based on this, it is absolutely clear that the size of the table is chosen depending on the area of the room. Also, soft wood cannot be used for the kitchen table due to its use in "extreme" conditions.
The choice of the external characteristics of the product is a responsible process, therefore, before starting the formation of a table for a summer residence with your own hand, it is extremely necessary to carefully assess the needs for which this table is being made.
Transferring ideas to paper
When creating a structure that is the fruit of your imagination, you will have to develop a diagram and drawings of your table with your own hands. For which there is a huge variety of electronic programs.
After a thorough development process, it is imperative to transfer the result to paper. It is very important to use this manual at all times for fast and quality work.
Creative process
The preparation of the drawings is the last preparatory step. Then you can start the most important part of the work - the manufacture of parts. Do-it-yourself wooden tables are much easier to create if the drawings and diagrams are as informative as possible. This reduces the likelihood of errors to a minimum.
You can do it yourself personally as desk and magazine or children's option... With a certain skill, it is really possible to create and computer desk... And also a dining or country model. Each of the options is fairly easy to implement.
The canvas for the countertop and the board with the beams, from which the rest of the parts will be formed, are processed with an available tool or, at worst, with coarse-grained sandpaper to remove the defects present in the form of irregularities and protruding knots.
Boards are sanded from all sides, including side edges and corners. If you are creating a canvas from wood cuts, you need to make sure that they are dry enough, and also repair small cracks found after visual inspection. And it is better to groove them. To get a more reliable web adhesion and save time for assembling elements.
Transfer the scheme to the finished canvas. The main elements are cut out with a jigsaw and, if necessary, the sections are ground. The protruding support elements are trimmed by about 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).
The workpieces are covered with a preparation that prevents moisture and pests from entering, and only after final drying is it allowed to resume the process of creating the table with your own hands.
Putting the details together
After making all the necessary parts, you can proceed to the sacred service. Namely, to put the desired masterpiece together. And this can be either a round table or any other selected product.
First, you need to assemble the support structure using screws and glue (first, thin channels are drilled with a drill to the length of the screw, otherwise there is a chance of splitting the part). For the connection, you can use galvanized screws, since they do not rust, and this is very important for wood products. Or wood glue.
According to the basic rules, the frame in length and width should be 30-25 cm less than the countertop.
On the sides, you need to attach additional boards to give rigidity and to hide the place where the legs are attached. Cut off the chamfers in the places where the legs are installed.
Then the table leg is fixed in place with clamps, and bolt holes are drilled in the frame. Place the supporting elements in their places and fix them with stoppers. Reinforce the structure with wood glue. Then set the tabletop in place for which furniture corners are used. At the very end, all visible screws are hidden by caps in the color of the wood.
The final stage. Finishing
A photo of the completed table can be seen below. This is surprisingly easy to achieve. Optionally, you can round either only the corners or completely the butt, depending on the type of table. It will be nice to make chamfers on the edges of the countertop.
In the entire structure, irregularities are sanded, with the help of putty, mistakes are hidden. To extend the service life with your own hand assembled table it is necessary to cover it with several layers of varnish or stain.
Thus, making a beautiful wooden table with your own hands is quite a simple pastime. And easy to do. The guarantee of extracting a solid, ideal in size and aesthetic result according to its drawings is: exact adherence to the manual, error-free execution and weighed selected material. And the resulting table will harmoniously fit into the exterior.
Photo of tables with your own hands
Coffee table was an integral attribute of Soviet kits upholstered furniture... According to the plan, such a set necessarily included a sofa, a couple of armchairs and, in fact, a table. The times of the Union of the Indestructible have long since sunk into oblivion, and the coffee table is still in demand. Of course, you can use it not only for storing magazines and other periodicals, but also, for example, for serving a romantic dinner, for handicrafts and other necessary trifles. He will successfully play the role of a bedside table or stand for pots or a vase of flowers. In general, this piece of furniture will be needed both in the living room and in the bedroom. Modern furniture stores are ready to offer many options for such tables, but real craftsmen can create their own exclusive option. This is a way to save money, and sometimes an opportunity to extend the life of some things, if you make it from scrap materials. In the article, we will consider how to make a coffee table with your own hands and what you need for this.
The simplest and most familiar material for the manufacture of this interior element, of course, is wood. In addition, wood is perhaps the most affordable and easy-to-use material. With the tools that every self-respecting man has in his arsenal, any board can become a coffee table.
Wooden coffee table - an imperishable classic
In order to make such a bench-bench with your own hands, you will need the following materials (all dimensions are given in cm) and tools:
- boards 2.5 × 7.5 (3 pcs.);
- boards 2.5 × 10 (1 pc.);
- boards 2.5x5 (8 pcs.);
- legs of the required length (4 pcs.), fasteners for them;
- screws - 3.5;
- self-tapping screws - 3;
- finishing nails - 3.75;
- glue for carpentry work;
- putty, paint, primer;
- sandpaper;
- saw;
- drill;
- a pair of short and long clamps;
- roulette;
- hammer;
- Kreg Jig for hidden holes;
- grinder.
Everything has been prepared, then we will start production:
- The ends of two boards 2.5 × 7.5 sawn along the length of the table must be cut at an angle of 45º. And cut the boards 2.5x5 with a length equal to the length of the previous boards along the inner saw cut.
- Place the blanks, aligning their edges, and measure the width of the table. Next, you need to cut out two parts equal to the desired width from a 2.5 × 10 board. Secure with self-tapping screws to each board.
- Make hidden holes at the ends of the crossbars. Later, they will help to fasten the products with the sides.
- Using carpentry clamps, secure the side boards by aligning the ends and screwing into the drilled countersunk holes.
- The following details - cut the end boards 2.5 × 7.5 carefully, you may need to adjust the workpieces, so make them a little longer, and then gradually grind off the excess. Glue the finished ends with wood glue and tighten with a strap until dry.
- Sand the surface thoroughly finished product... In the joints of the boards, if necessary, apply a putty, let it dry and sand again.
- Apply paint or stain and varnish (whichever you like best).
- Screw on the leg mounts and screw on the legs themselves.
A hand-made wood coffee table is ready to delight you with its versatility. It can be used both as a table and as a bench.
Wooden coffee tables can also be round. Let's figure out how to make such a round coffee table with our own hands. To make it, you will definitely need:
- boards;
- screws;
- joiner's glue;
- protective agent for wooden products;
- paint, stain, varnish;
- drill;
- jigsaw;
- level;
- roulette;
- Miter saw;
- clamps.
You can make a drawing for a coffee table yourself, there is nothing complicated about it. When the diagram with the dimensions that you need is ready, you can start working.
Action plan:
- First, make a support. Here you need to act as your fantasy and skill level dictate. It should look something like the picture. The best way to hold the leg parts together is to drill the hidden holes with a Kreg Jig, screw in place and cover the holes with plugs.
- The support must be sanded, then treated with a protective agent and painted or stained.
- To make the tabletop of such a coffee table with your own hands, the boards should be cut into parts equal to its diameter. Lay out, aligning the edges and the surface (you can't do without a level here). Glue with glue and fix the structure with clamps until completely dry.
- From the resulting square blank, using a special curved cutting machine, you can cut a perfectly round tabletop. Such equipment is unlikely to be found in a simple carpenter; a company specializing in the manufacture of furniture can help here. If you decide to do this operation yourself, you will have to try. First, draw a circle of the required diameter on the workpiece. Then secure the circular cut guide with a nail in the center of the marked circle and cut.
- The tabletop, like the base, should be carefully sanded, especially its edge, then treated with an antiseptic and painted (varnished).
If there is a desire, using stencils, you can apply a drawing, for example, a dial, as in the photo, or maybe something else. It all depends on the fantasy. Such a homemade table will decorate any interior, even the most sophisticated one.
Pallet coffee table
Construction pallets are extremely versatile construction material... Of these, if you wish, you can make many useful, comfortable, and most importantly exclusive pieces of furniture.
Do-it-yourself coffee table made of pallets - just quickly unforgettable
If the thoughts on how to make a coffee table out of building pallets with your own hands have already visited you, we will help them to realize themselves. To do this, we need the actual pallets and the usual set of tools and materials for working with wooden products, namely:
- hacksaw or jigsaw;
- sander or sandpaper;
- drill;
- screws;
- antiseptic for wood;
- paint, stain, varnish (at your discretion).
Operating procedure:
- To make a table from pallets, first choose the right material. Select pallets carefully. The boards should be free of large knots, mold and signs of destruction. It is best to disassemble the pallet by planks before starting work. Clean each of them, then saw off the necessary part, grind and cover with an antiseptic. You can immediately paint it, it will be much more convenient, because it will be impossible to get into some places when assembled. Then screw the required structure with screws and finish with varnish.
- It is best to make such a table on wheels. To do this, you can use furniture wheels, or better wheels for trolleys. The latter are more reliable, and their appearance is more suitable.
- Another option is to make small legs for such a table from small blocks, and the surface of the table can be covered with durable glass of the desired size.
Your do-it-yourself pallet table is ready. As it turned out, you can create an exceptional thing by spending very little time, and most importantly money. But building pallets aren't the only material at hand to make a small coffee table. Standard wooden boxes, for example, will do a good job of this.
Such a do-it-yourself coffee table will serve you faithfully for a long time, if you approach the issue of its creation seriously, despite all the seeming simplicity.
You can advise to make a table from a log or a picturesque stump, for example. It will decorate the interior in country style. It can be on casters and have an unusual-shaped table top made of durable glass.
Folding coffee table how to make
We all want to save more free space in the apartment. The abundance of furniture cluttering all the free space has long been discouraged. However, little furniture is also not the ultimate dream. There is only one way out - interior items that easily perform several functions. This is a transformer table. When folded, it is small in size and plays the role of a curbstone or a coffee table, and when disassembled, it is a full-fledged dinner table to host guests or host family dinners. How to make such a transformer with your own hands?
Computer programs will help to create drawings of such a table. With their help, you can calculate all the nuances.
The best material for creating a transformer will be laminated chipboard.
Responsibly approach the purchase of the necessary accessories. The durability of the mechanism, and, consequently, of the table as a whole, depends on it. Mechanisms for folding tables can be purchased at the store.
Thus, when unfolded, this table is very stable and easily becomes a dining table.
100 examples of coffee tables
Now you know that you can easily make a small coffee table yourself. At your request, it will be folding or not collapsible, on legs or on casters, in the color of wood or painted. Imagine, try, and your interior will be unforgettable for little money.
Making furniture with your own hands is not only a great way to save money, but also an opportunity to put your creativity into practice!
It's about making coffee tables with your own hands. There are never too many side tables. They can be placed next to the sofa to place a vase of flowers or a mug of tea, used as a bedside table or as a stand for pots of indoor plants. However, monotonous wooden tables are unlikely to revive a dull interior. I want something stylish and unexpected ...
Stylish table made of wooden slats with your own hands
This bench can serve as a coffee table, extra seating or seating area indoor plants... Such a piece of furniture will "fit" well into almost any interior!
do-it-yourself coffee table photo
Materials:
Tools:
Step one: Use a hacksaw to cut the ends of two 2.5 x 7.5 cm planks at a 45 degree angle. Cut out fragments from 2.5 × 5 cm blocks, the length of which will correspond to the inner length of 2.5 × 7.5 cm of the workpieces.
how to make a coffee table with your own hands. Photo
Step two: Place a 2.5 x 5 cm piece in the middle and 2.5 x 7.5 cm at the edges. Make sure the ends of the inner rails are aligned.
Step three: Measure the distance between the outermost 2.5 × 7.5 cm blocks and cut two pieces of this length from the 2.5 × 10 cm board. They will serve as lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.
Step four: Using the Kreg Jig, drill two pocket holes at each end of the support rails. These holes will be used to connect to the 2.5 x 7.5 cm edge bars.
Tip: It is difficult to give specific guidelines on how far from the edge to attach the Kreg Jig. It depends on the length of the screws used, the exact thickness of the board, etc. We advise you to first practice on unnecessary trims of the boards.
an unusual coffee table with your own hands. Photo
Step five: Place the 2.5 x 7.5 cm blank around the edges of the structure. After making sure that their ends are flush, secure them with clamps.
Tip: If you are using soft wood (such as pine) to make your table, place unnecessary board trimmings under the clamps. Otherwise, clamp marks will remain on the wood.
Step six: Securely attach the outermost 2.5x7.5cm bars to the base of the bench by screwing 3.5cm screws into the countersunk holes that you made a little earlier on the ends of the support rails.
wood coffee table. Master Class
Step seven: Measure the width of the base you made to determine how long you need to cut 2.5 x 7.5 cm for the end of the bench. We recommend that you take a sip with a small margin in length, and then slowly grind off the excess until you achieve a perfect fit.
Step eight: Moisten the ends of all planks with water and apply a small amount of Gorilla Glue.
Step nine: Place the end boards in their intended place and wrap the entire structure with a strap so that it does not fall apart while the glue is dry. For reliability, you can additionally fix the ends with several finishing studs.
Step ten: Sand the surface of the bench with 120-grit sandpaper to eliminate any unevenness in the seams. Fill all gaps in the seams and grooves from the nail heads (the latter must be sunk into the wood) with putty. When the filler is dry, sand the surface again, this time with 220-grit sandpaper.
Step eleven: Paint the bench. We advise you to sand the surface again with 400 grit sandpaper and water before painting.
Step twelve: On the lower support rails, fit the special mounting plates for attaching the legs. When securing them, make sure that you drill holes in places where the screws already screwed in are not located. The distance from the anchorage to the edge of the bench base should be about 2.5 cm. Screw the legs into the anchorages.
Copper pipe coffee table. Master Class
The material for making the next table is perhaps the most unexpected. This time we decided to tell you how to make a table out of ... copper pipes OK.
Materials and tools:
The illustration below shows all parts (pipes (A-E) and various connecting elements(F-H)) indicating their size and quantity. All that remains for you is to take it in your hands pipe cutter and sit in front of the TV, which will brighten up the tedious process of cutting a little. It's not difficult, just a little boring. 😉
When all the blanks are ready, you can start assembling the bottom of the table. How to do this is shown in the figure.
Having collected the lower tier, you can proceed to the upper one. The only parts not listed in the parts list are four 2.5 cm long pipe pieces that fit in tees at the top of the corner posts. You will not be able to put on decorative caps without these inserts. the latter have the same diameter as the tees.
A reliable connection of the tubes to each other will ensure glue, but we recommend applying it only after preliminary assembly of the structure, i.e. after making sure that all the cut tubes are of the correct length and fit well together.
Wooden shelves, which you can pre-paint if you wish, are secured with special clips that are placed on the underside of each board. You are now ready to decorate your home with a new DIY table!
DIY lightweight cement table
Countertops and other interior elements made of concrete are becoming more and more popular lately. However, for all their attractiveness, they are not devoid of a number of disadvantages. First, pouring large quantities of concrete can sometimes be quite expensive. Secondly, when it comes to small side tables, another serious problem comes to light - such furniture turns out to be too heavy. On the one hand, there is a desire to get a good solid thing, on the other hand, I want to be able to move a table made with my own hands without the help of professional loaders. The solution found can be considered an insight.
Materials and tools:
Step one: Mark and cut out the Styrofoam sheet. You can cut 18 40x40 cm squares from a 120x240 cm piece.Laying them on top of each other, you get a 40x40x45 cm parallelepiped.
do-it-yourself styrofoam table. Photo
Step two: Glue the cut pieces. 3M Super 77 Aerosol Adhesive is ideal for this. This step is best done outdoors. Remember to wear gloves and a long sleeve shirt. Apply an even layer of glue to one side of the first square, then do the same for the second. Wait ~ 15 seconds, then connect the squares, making sure their edges are aligned. Repeat this until all the square blanks are connected into a single whole. Wait about 30 minutes before proceeding to step 3.
Step three: Now the most interesting thing ... giving the resulting parallelepiped the outlines of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. Your design will look rough and angular at first, but don't worry! After the table has been given the desired shape, it is time for sanding. Using 36-grit sandpaper will quickly smooth out any unevenness. As you get closer to ideal, gradually move to a finer grain size sandpaper. Do not strive to achieve a super-smooth surface, at this stage it is important for you to achieve only the desired shape.
Step four: The surface of the future table has been sanded, the time has come to cement it. The first layer, applied all over the foam mold, will fill the voids and texture of the foam. You only have ~ 20 minutes, so act quickly so you have time to smooth out the bumps. When the applied grout is dry, you can apply the next coat. The number of layers depends on how smooth and flat surface you want to have in the final (usually four to five coats are required). It should be remembered that the smoother the surface of the final layer before it dries, the less it will have to be sanded!
Tip: When preparing the grout, follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover the surface of your workbench or workshop floor, as this is a messy job.
Step five: After the final cement layer has dried, you can sand the surface if desired. We wanted to achieve a glossy finish, at least on the top of the table, so we sanded it with a range of grit sandpaper ranging from 100 to 2000.
Tip: If you are planning this operation, get a protective mask that will help you keep your lungs free from cement dust.
(The table made in this project turned out to be very strong and sturdy, but at the same time it weighed no more than a kilogram.)
Diy stump table
The material for the next table is sometimes literally lying underfoot. Even residents of megalopolises, if they wish, can find a suitable stump.
log table. Photo
Materials and tools:
- wooden block;
- white acrylic paint;
- hand sander;
- chisel;
- hammer;
- decorative upholstery nails;
- molar tape.
Step one: Find a table base! It should not be an old rotten stump, but a freshly sawn block of wood. Let it dry for at least 6 months (there is nothing worse than waiting, but it must be done) until the bark begins to separate from the trunk.
Step two: Using a chisel, gently clean the bark from the block with downward movements. If the stump is dry enough, you don't have to use too much force to do this.
Step three: Via grinder with medium-grit sandpaper, sand the surface to remove any residual bark and smooth sharp corners. Remember to sand the bottom and top cuts. Wipe the wood with a damp cloth.
Step four: It's time to paint. We used a white semi-gloss paint that included a primer (for full coverage, we needed to apply three coats). You can choose a different type and color of paint, focusing solely on your taste. Do not forget to prime the wood surface beforehand. Make sure you don't forget to cut the bottom cut.
Step five: Prepare decorative nails. Along the top edge of the side surface of the block, stick a strip of masking tape, thereby marking the place where the first row of nails will be located.
Step six: Use a hammer to hammer in the first row of decorative nails. To ensure that the distance from them to the upper edge is the same throughout the "line" of the nails, use the strip of masking tape you glued earlier as a guide. After the first row is completed, repeat the same with the second and third row of nails (we needed almost 150 nails for three rows).
Tip: Tap the bottom surface of the stump with furniture felt so that you can move the table around the room without damaging the flooring.
The work is done. You can use your new piece of furniture and be proud to have made this adorable do-it-yourself coffee table.
Coffee tables: do it yourself
Wooden table: how to make?
Many people are interested in how to make a table out of wood with their own hands to get a model with an original appearance... Let's consider one of the options.
To make an original coffee table with your own hands, you should take bar with a section of 5x10cm. It is sawn into pieces of the following length: 130cm - 9pcs, 21cm - 12pcs, 34cm - 2pcs.
The prepared timber is placed in three rows, leaving space for the legs to be attached.
The top two rows are removed. The timber in the third row is slightly shifted to get an interesting look. Next, mark the places for fastening the transverse parts.
The extreme bars of the second row are laid and the places of the cuts are marked. Then the cuts are made circular saw or a hacksaw with a chisel.
The bars of the second row are fastened with screws.
Lay the third row, shift the parts and fix them.
An empty space is formed under the tabletop, in which the legs.
Wood is processed protective compound preserving the texture of the wood.
The original model of a wooden coffee table with your own hands
First, they prepare for making a table with their own hands planks: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.
Planks 20x4 and 40x4 are glued in pairs. So that they stick together securely, they are clampedclamps.
While the blanks for the legs are drying, collect box from the rest of the details. They are connected with wood glue and nailer.
Legs attached to the box with countersunk screws. Crossbars are placed below between the legs.
Cover for a table made of wood is also made using boards 22.5x45cm. They are glued together, and then the resulting square is sawn into two triangles.
One triangle is fastened with screws, and on the second, the slats are fixed so that it is removable.
All parts are polished and painted.
Stylish coffee table. Master Class
They start making a stylish table with their own hands with a sheet marking Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.
A nail is driven into the center, to which a thin rope or harsh thread is tied.
A pencil is tied to the free end. This allows you to draw a circle.
If you want to make a table with your own hands not round, but of a more interesting shape, then the shape of the circle is changed by drawing bends.
The table top is cut jigsaw or with a reciprocating saw.
Edges are processed sandpaper.
Legs fastened with screws. If they are inclined, then the slope should be outward.
Table surface paint in the desired color.
Simple coffee table
To make a coffee table with your own hands, take boards 40x15cm - 2pcs and 50x19cm - 2pcs. In addition, feet and mounting plates are required.
On one of the boards, they fix more plates for attaching the legs. Step back a little from the edges.
The sides and top of the table are attached with wood glue.
It dries for about half an hour.
Diy log table
A do-it-yourself coffee table with this appearance will become a decoration for a summer cottage or country house... They start by assembling the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68cm long, 45cm wide and 40cm high is attached to the base.
table made of logs with your own hands. Photo
After that, cut thirty pieces of round logs 45cm long and twenty-four round cuts, the thickness of which is 3cm.
The prepared logs are fixed along the perimeter of the box. Fix from the bottom to the base rollers... They are installed, stepping back from the edge by three centimeters.
In addition to glue, it will be useful to fix the logs on the self-tapping screws from below.
Installed on the box plywood cover. Round pieces are glued to it. The space between them is filled with wood putty, which does not shrink when dry. Apply it in stages so that the previous layer has time to dry.
After the putty dries, the surface grind... For this, a surface grinder is used. The log table can then be used.
Rustic side table
If you are wondering how to make a table from wood cuts with your own hands, then you should read the instructions.
They start making such a coffee table with their own hands by choosing the right material.
Selected saw cut inspecting for interesting parts or parts that need to be removed.
Excessively rough, protruding parts are cut off. On the side where the countertop will be, the surface align.
For work use cleaver that moves at an angle of forty-five degrees.
The sides also need to be aligned.
All surfaces grind, using ever decreasing grain size.
Glossy varnish mixed with resin in equal proportions.
The resulting composition is applied to the wood in a thick layer. It will dry for a long time. If gaps appear during the drying process, then they must be filled.
Bottom side clean up... If there are voids in the wood, then they are filled with resin gradually until the hole is filled.
If there are air bubbles in the dried resin, then the surface is heated with a heat gun or burner.
A second layer of resin is applied and left to dry again for two days. The entire surface of the countertop must be glossy.
At the handles of the ax, a part is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.
Mark places for legs and make holes.
Glue is poured into the holes and the legs are installed. Special overlays are attached to each.
White coffee table
They make such a coffee table with their own hands from plywood and glass. First, a drawing is prepared and dimensions are determined. Then proceed directly to manufacturing.
do-it-yourself coffee table. Blueprints
Plywood acts as a tabletop box with partitions, covered with glass on top. Triangular legs are attached to it.
At the box, you can make a door to access what is inside, or raise the glass.
Legsfor a table with your own hands, it is better to cut it out of thick enough plywood. It should be remembered that double legs are easier to make than a larger number of single ones.
When all the pieces are ready, they are put together and fastened. The table is painted or varnished.
DIY pallet table
If you know how to make a table from pallets do it yourself, you can get an interesting option for home furniture. Pallets must first be sanded, cut into pieces and primed.
pallet table. Instructions
A table is assembled from the prepared material. For this, legs or wheels are attached. As a table cover, a pallet can be used directly or a surface assembled from individual planks.
After all the parts are connected, the structure needs to be painted or varnished. After that, the pallet table is ready.
The second variant of the pallet table
To make such a table with your own hands, you will need one or two pallets. You should first draw a sketch of the future product, taking into account all sizes.
The table will be with a shelf for small items under the table top. The structure is assembled from prepared parts.
The surface is painted with black paint, but this is not the only one possible variant... There are many other decorating options.
Coffee table-stand
Option how to make a table from copper pipes do it yourself, it can be interesting to many craftsmen.
The pipes are first marked and cut. Then they are coated epoxy glue and assemble the base for the table.
This base is applied to the board and the attachment points are circled. In these places, you will need to drill holes by the pipe diameter.
Four holes are drilled, but not through.
The board is impregnated polyurethane and cover stain.
The remaining pipes are collected frame.
Legs and base cover paint in the color of the countertop.
From a piece of cloth they make pocket, which is hung on the transverse parts of the legs.
All parts are assembled together with epoxy adhesive for durability.
Do-it-yourself table in a nautical style
Such a table from the old window frame looks very romantic. The frame is cleaned of dust. If required, replace the glass.
Wooden surface paint white acrylic paint. After drying, a layer of paint is treated with sandpaper so that the wood comes out. An option is also possible in blue and white colors.
To make legs, take stalk and sawn into pieces of 34 cm. After that, it is processed with sandpaper to remove roughness.
The workpieces are drilled in four places. Next, each leg is attached to the base, and the base with legs to the frame. All this is done with self-tapping screws.
The legs are pasted over with a coarse rope.
For refined and fat-free glass stick marine souvenirs and seafood. From above, they must be covered with glass, which is cut out in the workshop to fit the frame.
A loop is made at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the second end reaches it, an interesting sea knot is tied.
An integral attribute of every home is a coffee table. At first glance, it may not seem like the most needed furniture, the purchase of which is postponed for a long time.
But it is these interior items that make it truly cozy and comfortable. On the coffee table, you can place all the things you need that should be at hand: books, remotes, keys and other small items.
DIY wood coffee table
If you still have not been able to find the option that suits you or are having difficulties with the design, we will share with you ideas that will tell you how to make a coffee table with your own hands.
Wood coffee table will perfectly fit into almost any style of interior
Wood coffee table
Wood is especially popular among the many different materials from which furniture is made. If properly cared for wooden furniture, it will serve you for a very long time. In addition, by working on your own, you can create a unique piece of furniture.
To make a wooden coffee table yourself, you will need to prepare everything necessary materials and tools. Finished construction you can put it directly on the floor or additionally make four legs on which your table will be located.
An example of how you can make a do-it-yourself coffee table from wooden pallets
By using multiple drawers, you can also create great coffee tables for your living room. Four large drawers tied together form a stylish side table. There is usually a gap in the middle of the boxes that can be decorated with various items.
Living room table made of wooden boxes
Photo: do-it-yourself coffee table
A coffee table made of wooden boxes is a great place to store all the necessary things
Diy rectangular coffee table
Modern look
You can also make a side table that looks modern and stylish. But before choosing a specific design for the table, determine the general composition of objects in the room. It is important to maintain a uniform style in every item that is used indoors.
Stylish wooden table with metal legs
Take a look at the retro style, which is also very popular today.
A true work of art - an elegant low coffee table made of wood
Effective design move - furniture duo in the living room
Decorating a coffee table
You can turn your coffee table into a stylish and trendy piece of furniture with decor. Thanks to this, the most inconspicuous table will become a real work of art. You can decorate it with anything: old wallpaper, shells, mirrors, fabric or mosaics.
Use textiles to decorate your coffee table to give it a touch of originality
Think about your mood. After a long day at work, you want to return to the atmosphere of tranquility, comfort and coziness. Therefore, for table decor, it is better to select elements that fit perfectly into the overall interior of the apartment and do not violate the harmony.
Mobile coffee tables on wheels are a beautiful piece of furniture that will transform any living room
Materials and items that can be used more than once
A wooden pallet is a versatile item from which you can make anything with your own hands. Perhaps the easiest way is to build a coffee table, since the pallet is, in fact, a ready-made tabletop. It can be painted in any color, pattern, symbol or ornament. The legs can be castors or wooden blocks.
Turn a wooden pallet into practical designer furniture
Table design options depend only on your skills, preferences and, of course, the interior of the room.
Glass table top is able to set the tone for the entire interior
Suitcases and old radiators
Your old suitcase can become an integral part of the interior of the apartment. To make a table from it, it is enough to attach four legs. A coffee table made of a battery will also look unusual and original.
Loading ...