Making a wire shade frame. Beautiful do-it-yourself chandelier shades: a step-by-step master class (photo). How and from what you can make a frame

An indoor chandelier is not only a lighting fixture. It is no exaggeration to say that she is the main decoration of the room. Hand-made things are considered especially valuable. This allows you to highlight the special taste of the owners of the home, as well as an extraordinary and creative mind. Of course, this type of work is quite difficult and requires increased concentration. But at the same time, when creating decorations for your home, you can find many interesting and extraordinary solutions in it!

This article presents some ideas for decorating a chandelier with your own hands, as well as instructions for them. Everything is written so simply and clearly that anyone can accomplish their plans at home.

In order to make a chandelier, sometimes the most unusual materials are used. For example, everyone is already familiar with glass or wood, plastic, and so on. But sometimes, when you want something completely "unusual", wooden skewers, glass wine bottles, cans, all kinds of tree branches, cardboard, and even straw come into play. You need to choose depending on the idea of the creator and on the wishes of the apartment owners. You also need to take into account the general interior of the room where the finished product is supposed to be placed.

An interesting idea for a chandelier made of plastic spoons

Plastic disposable spoons are one of the simplest and most readily available materials for creating a chandelier in a room. Their advantages are low price, variety of colors and such material will serve for quite a long time. To create such an extraordinary chandelier, you need a minimum of investments, both physical and material.

Materials:

empty bottle from under drinking water, with a volume of 5 liters;
plastic spoons (their number depends on the size of the bottle);
glue for plastic;
an old chandelier (or rather, a cartridge from it);
sharpened knife.

Process of creation:

First you need to prepare a plastic bottle for subsequent actions. Remove the label in advance, cut off the bottom, dry well.
Then you need to get the plastic spoons out of the packaging and carefully cut off the unnecessary handles with a knife, leaving about 2-3 centimeters above the "scoop" level.
You need to glue the “scoop” blanks to the base of the bottle. Apply a large amount of glue to the left "tail" and press it to the surface (with the convex side of the spoon outward). It is necessary to cover the entire bottle in a circle until the entire perimeter is filled with plastic spoons. It is advisable to arrange them in a checkerboard pattern and slide them together slightly. This will leave fewer "free spots".
From the old unnecessary chandelier, you need to remove the cartridge, and then place it in an already pasted and dried bottle and fix it on the frame.
A decorative bowl can also be made from plastic spoons: stick the "scoops" around the neck of the eggplant.
Install and connect the chandelier, check its operation.

Note! Option is possible decorative painting or painting spoons in absolutely any color. Thus, your product will look even more beautiful and more original!

Chandelier made of plastic bottles in the form of leaves

Another unusual option in the interior will be a leaf-shaped chandelier. It is created from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most daring ideas.

Process of creation:

Cut plastic bottles into pieces shaped like future leaves.
Each workpiece has already finally fixed the shape of the sheet.
With a soldering iron with a thick tip and a one-sided bevel, you need to lightly fuse the sections of each leaf in order to give the future product the greatest effect.
In the same way, thanks to a soldering iron, you need to give the blanks a sheet structure. You need to act very carefully and accurately, because you can easily make a hole in the plastic. Such a leaf with the outlined contours of the veins and slightly fused edges will look complete.
With a hot needle at the "leg" of each leaf, you need to melt several holes in order to attach them.
Thanks to the thin wire, form branches and screw to the steel wire frame.

It would also be a great idea to make a new chandelier in the form of a plafond for a floor lamp or a lamp on a table. Thus, it will be a great addition to the previous product!

Chandelier with paper butterflies

The most common product is a butterfly chandelier. And this is no accident. To begin with, this option looks luxurious and expensive, and secondly, its production does not require any special physical costs. Thus, even a child can participate in the creation of a chandelier.

Process of creation:

It is based on either an old chandelier or a similar frame. If there is none, then you can take the simplest wooden or metal rim. If such material is not available, then, as an option, you can take a thick wire and make about 2-3 skeins, so that a circle is formed.
Cut out butterflies from paper according to the pattern. You need to take a butterfly pattern and fit it to the desired size. It also looks very unusual when there are butterflies of several sizes on the chandelier at once (again, depending on your desire). Transfer the outlines to paper and carefully cut, preferably with a sharpened office knife, or with small, not rounded scissors. It is better to use a material for the templates themselves that is dense, not very dirty and does not attract dust. For example, velvet paper is very poorly suited for a product, because in the future you will need to vacuum the chandelier quite often.
Take a thread from nylon or transparent fishing line and attach butterflies to it. You can fix it in two ways: either pierce the bodies of butterflies, or glue them onto silicone glue.
Next, we attach the threads with butterflies to the base of the frame and decorate it.
You can also try an interesting option if you make a wire ball! It should be based on a suspension from a chandelier and place several patterns of butterflies on it with a glue gun.

Fabric chandelier

This chandelier is also based on a frame. As in the previous version, either old metal frames or dense wire are suitable for its manufacture.

After you have previously prepared the base, start cutting out the fabric from which the lampshade will be made in the future. How long will it be ready product, depends on your desire, but it should be borne in mind that the width of the fabric must be the same as the diameter of the frame! Once you finish the pattern, you need to try it on.

Another nuance is that you will need to sew on the top of the fabric directly on the frame, which means that it (the frame) must be solid. Otherwise, if it is possible to thread it directly into the fabric, then initially you should bend the upper edge of the pattern and stitch it, and then iron it with an iron. Then we sew a seam on the side of the product.

So that the lampshade does not lose its shape, due attention should be paid to the material. If the fabric is too light, "airy", then the bottom of the product should be made heavier. You can use cardboard or fishing line for this.

A neatly sewn fringe, lace or braid will also look beautiful. But don't overload the product! The process of making a fabric chandelier is similar to making a lace chandelier. So you can feel free to experiment with the materials that are located on the frame.

Plafond made of threads and a balloon

Materials:

thick threads, for example woolen, cotton, or jute rope - at least 1 meter;
cartridge;
petrolatum;
PVA glue;
a brush in order to apply glue and petroleum jelly (it is advisable that the brush does not fade);
1 or 2 pieces of balloons (the first one in order to work with it, and the second one in order to check the finished product, if desired);

Process of creation:

Inflate the balloon to a certain size, secure. Remember that the finished work will exactly repeat the shape of the ball! With a marker, draw a couple of circles at the top and bottom, in order to determine the boundaries of the winding of the thread.
Using a brush, smear the ball around the entire perimeter with Vaseline.
Pour PVA into a plastic container and thoroughly process the threads with it (It is not advisable to apply glue to the entire length of the threads at once! Process them as you wind them around the ball!).
Considering the borders that you marked with a marker, wind the threads around the ball. Do not forget that depending on the density with which you wind, the future depends appearance products.
After winding, you need to leave the product for a day until it dries completely; After complete drying, you need to burst the ball and remove it through the holes.
Cut a place at the top and insert the cartridge.
In order to be completely sure that the product is strong, you can insert a ball into it and inflate it. Likewise, you can test the flexibility and reliability of a lampshade.

Alternatively, you can spray paint the structure or acrylic paint, attach all kinds of decorative ornaments to it, such as butterflies, artificial flowers or beads. It is also a great idea to arrange several balls in the form of a bunch of grapes and hold them together.

Wine bottle chandelier

This version of the chandelier is a little more complicated than the previous ones. It is quite difficult to make a chandelier for this, the manufacturing process will require accuracy and care. However, you will love the result!

Materials:

wine bottle;
glass cutter;
sandpaper for sanding the edges;
cartridge;
electrical wire;
metal or wooden frame, rim.

Process of creation:

First you need to prepare the bottle itself for further manipulations with it. The first step is to draw a straight line around the perimeter at the level you need. This is required in order to cut off the bottom of the bottle with a glass cutter;
In order not to cut yourself on the glass, you need to grind the sharp edges sandpaper;
Pull the wire through the neck of the bottle and then connect the cartridge;
Attach the bottle to the frame.

You can also decorate the bottle with all kinds of decorative items, or leave it in its original form. In any case, it will look original and impressive.

The number of products on the frame depends on your desire. You can either leave one bottle, or fix four or more bottles at once.

Laser disc chandelier idea

This idea is great for those who have a large number of laser discs in their home and don't have to throw them away. It should be noted right away that the manufacturing options and the result can be very different. It all depends on your imagination and creativity!

Materials:

two round wooden planks of different thickness, and which are slightly larger in diameter than the discs;
racks made of metal or wood;
Fluorescent Lamp;
magnetic switch;
disks.

Process of creation:

Make a hole in a thicker plate and install a starter with a switch in it.
Then connect it all to the lamp.
String the discs onto the lamp.
Place the stands around the discs and secure the top.

The finished product will delight its owners for a long time, and it does not require special care. It is not advisable to place this type of chandelier in the children's room so that the child cannot harm himself (only if the chandelier hangs out of reach).

Shabby chic chandelier

To create spectacular lighting in a room, you can also make a chandelier out of fabric or beads. The result is a kind of chandelier or shabby chic shade.

Materials:

a ready-made metal or wooden frame (or it can be made from an old hoop, garden basket, thick wire);
socket and lamp;
chains and threads for decoration;
all kinds of beads and beads.

Working on such a shade is not difficult, but it is a very painstaking task. These chandeliers usually have two or three levels of rings that are stacked on top of each other. It all depends on the size of the chosen bases. If you take rings of the same diameter, then the finished product will be made in the Art Nouveau style.

One of important points consists in the fact that before starting the design of the chandelier, you need to paint and wrap the frames with decorative materials!

The approximate consumption of beads is:

For the lower part of the lampshade - 16 mm beads, about 15-17 pieces per strand;
For the upper part of the lampshade - 12 mm beads, about 35 pieces per strand.

Naturally, when stringing beads onto a thread, you can increase or decrease their number or the degree of tension on the thread. But it is still advisable to stock up on materials in excess of the norm.

The essence of the work is to suspend the strings with beads in a "waterfall" or "cascade" so that they flow down the structure.

In order to make the effect of "dimming" the light, you can sheathe the frame with a dense fabric.

A hand-made chandelier will definitely bring a fresh touch, originality and beauty to the interior. You will immediately notice how the room will sparkle with new colors, and your guests will sincerely admire your creativity, hard work and original taste!

90 photos of DIY chandelier ideas

If a person loves creative experiments and wants to spend the day off with benefit, you can make a new one beautiful lampshade.

This craft will decorate your home. And only at first glance it seems that it is too expensive to make lampshades for table lamps with your own hands. There are ready-made proven schemes with dimensions. All you need is a little wire, fabric and thread (or fabric glue). This is done easily, and simple materials at hand are suitable for crafts. An interior element such as a lampshade will add a new motive to the familiar interior of a room or become a wonderful gift for friends and acquaintances.

How to make a lampshade for a table lamp with your own hands?

What is a living room without a beautiful lampshade? Craftsmen of hand-made art have in their arsenal a lot of advice on how to create a wonderful lampshade for an old lamp from the time of grandmother's youth. The most practical option is to make a round wire frame for a table lamp shade. And pull the fabric over the wire and fix it.

There are ready-made proven schemes with dimensions. By following the instructions, a beginner will avoid many mistakes. Here is an example of the most common classic lampshade frame scheme. We also make a pattern for the fabric according to these dimensions, but with an allowance.

The best fabric for a lampshade is felt or cotton. Felt allows you to make a multi-layered unusual craft. And on plain cotton before fixing the fabric on the frame, you can apply a pattern with an iron. To fix the fabric correctly and evenly, it is convenient to use transparent textile glue. It can be found without any problems in a decoupage store. The result is an excellent lamp.

How is the drawing applied? There is no special trick in this either. You need to find special paper for thermal transfer of photos. A suitable drawing is printed on it, and then you need to take a heated iron and iron every millimeter of paper well. You don't need to do anything else. When the pattern has cooled down, the fabric is securely attached to the frame. Just do not forget to make a small gap when cutting out fabric shreds so that the edges (top and bottom) can be folded and carefully glued from the inside out. Or use ordinary colored tape for these purposes.

Frame options

DIY lampshades for table lamps are, in any case, nicer than factory-bought ones. Everything is possible that the author's imagination is enough for. But for a round shape, the easiest way is to choose a pattern that is glued to the fabric.

If you don't want to mess around with drawings, just take a regular plain chintz fabric and make patterns that are suitable for the shape of the wire frame. The main elements of crafts are imagination and the ability to work with your hands. So wire frame DIY do-it-yourself lampshade for a table lamp.

Unusual lamps for a new interior

When a renovation is made in a new room, and you want to complement the image of the living room with some kind of exclusive detail, you can put one lamp with an unusual design on a small coffee table... Or on the dressing table in the bedroom. This will be an excellent solution. After all, even when the cost of decor is minimal, creative taste is always appreciated.

Find unusual ideas for a lamp, and, in particular, a new lampshade, you can at exhibitions of handicrafts, or simply by using your maximum imagination. Rice paper lampshades of various shapes are now popular. Many people love colored things and decorate the frame with decorative colored beads.

The main thing in creative experiments is to choose the right shade of small decorative elements. When style, color and shape are chosen correctly, even the simplest things will look sophisticated in your room.

Stylish cardboard lampshade

You can make a do-it-yourself lampshade for a table lamp from cardboard. It will be completely different from the others. The material for the craft needs to be selected durable, but thin. The advantage of this option is that it is an incredibly easy way to create a lampshade from scratch.

The sequence of actions is as follows:

4 identical frames are cut out of cardboard. The same frames in which photographs are placed.
A piece of fabric is glued to each frame at the back.
On the side, neatly make several holes with a gypsy needle and sew the frames with laces. You need to make a small flashlight. The cardboard is pre-glued. It is stitched to make the craft look more beautiful.

The advantage of this option is that it is a completely simple way to create a lampshade from scratch. Moreover, this "flashlight" is a very light object. And it is possible to repaint it in any color, but preferably to match the selected fabric. It looks unusual and is suitable in style for elegant interiors.

DIY lampshades for table lamps made for a nursery

An interesting lamp in the nursery will be very useful. Make a better lampshade for your child together. Trust his personal taste. Indeed, for a child, the main thing is the process, not the result. You can use thicker materials that do not transmit light well, for example, plastic pasted over with paper. With a plastic lamp shade, the lamp weakly illuminates the room, it acts as a night light.

Maybe the child wants to see his favorite cartoon character on such a night light. Using the cotton print idea it can be done.

Lampshade for a cozy bedroom

But for a women's bedroom, a lampshade with a knitted pattern is more suitable. Some stores sell simple knitted napkins to decorate tables or shelves. These napkins are great. If a woman knows how to crochet, she can make such a napkin herself.

When napkins need to be shaped into a ball, you need to put a few pieces on a baby ball, coat it completely with glue and let it dry a little. Remove unnecessary details in advance. The fabric is then removed and hung on the prepared wire shade circle.

A self-knitted napkin already has the required size in advance, it does not need to be adjusted to the size of the frame. The napkin is sewn to the edge of the frame with ordinary threads. Do-it-yourself lampshade for a table lamp crocheted as easy as shelling pears.

A ball of thread as a lampshade

A very popular method is a glued ball of fine threads. All you need is a skein of thread, PVA glue and balloon... You can take thick threads.

What to do?

A balloon is inflated, smeared with glue.
On fresh glue on the ball, layer by layer, wind the threads in any order.
A place is left at the bottom so that you can then twist the light bulb.
When a ball is obtained, a layer of PVA is smeared on top of the thread chaos again.
This ball is left to dry for 12 hours.

After that, the balloon is pierced with a needle and pulled out. The lampshade is now ready to be installed on the lamp. DIY lamp shades for table lamps made using this technique do not have to be round. Instead of a ball, it is convenient to take a plastic 5-liter bottle or other square-shaped object, and apply the same "scheme". You get a wonderful lampshade if you use an inverted plastic flowerpot instead of a shape.

New life of an old lampshade

What if there are lamps with lampshades, but the old glass shade is broken? How to repair a table lamp shade with your own hands? Sometimes you don't want to say goodbye to your old favorite things, even though they age and fade over time. What can be done to make them continue to serve? They can be refined and returned to their beautiful stylish look. But how to update the lampshade of a table lamp with your own hands?

Of course, the old frame must be repainted, repaired, if it is cracked somewhere. Nowadays, many types of glue for the restoration of such things are being sold.

Then think about which base you will choose for your craft. If you are new to hand-made, ask for advice from those who are more familiar with the details of this hobby. But still the best basis for a lampshade will be a classic fabric.

It happens that you really want to update the interior, but you don't know where to start. Sometimes you just need to change the lighting. But buying a new lamp is expensive, and in some cases it is not even necessary. We invite you to consider several master classes on how to update a desktop lampshade

What you need to create lampshades

You can update lampshades for your own hands with absolutely any materials:

cloth;
artificial flowers;
skin;
thread and rope;
paper and so on.

Also be sure to have tools such as scissors and a glue gun.

A simple and original way to decorate an old lamp

These lamps are very well suited for chic feminine interiors. To give your lampshade this look, use the following materials:

shade;
artificial flowers (flower stalks can be bought in shops for creativity, but you can buy bouquets and cut off the hats from them, sometimes it turns out cheaper);
glue gun;
scissors.

Master class on how to update a lampshade for a table lamp with your own hands:

Cut off the extra parts of the stem from the flowers, leaving only the cup that connects the petals.
Preheat your glue gun.
Apply some hot glue to the cup of one stalk and glue it to the lampshade. Start working at the top or bottom edge. Glue the flowers either in a circle or in rows, pressing them tightly to each other.
Hot glue dries quickly, so work gently.
When you have pasted over the entire lampshade, fluff up the flower petals.

Tip: interesting DIY lampshades for table lamps are obtained by combining several shades of colors that flow smoothly.

Geographic lampshade

Such a lamp will look great both in the living room and in the child's room.

You will need:

shade;
map;
ribbon;
PVA glue;
some water;
brush;
glue gun.

Master class on how to make geographic lampshades for table lamps with your own hands:

Prepare the map. It can be bought in a store, printed, or it can be special sheets for decoupage.
Mark the required width on the map and cut out a rectangle. If you don't have enough of it to wrap completely around the lampshade, then add another piece.
Dilute in a little water.
Cover the back of the card with glue and carefully glue it to the lampshade. Use your fingers to smooth out any pimples if they appear.
Wait until the card is completely dry.
Cut off excess pieces of paper.
Preheat and use it to glue the tape along the edge of the lampshade at the top and bottom.

The geographic lampshade is ready!

Book sheets as decor

In the same way, as in the previous mater class, you can decorate lampshades for using book pages.

To do this, rip out a few sheets from an old book and trim the edges so that they are not frayed. Lubricate each sheet with PVA glue and stick it to the lampshade in a chaotic manner. The paper should protrude slightly around the edges. When all the sheets are in place, fold the protruding edges inward.

Warm ombre lampshade

Such a lamp is ideal for the cold season, as it will bring a note of warmth and comfort to any interior.

List of what you need:

shade;
several types of yarn that match each other according to the color palette (for example, white, dark blue and turquoise);
glue gun.

Master class on how to make a beautiful lampshade for a table lamp with your own hands:

Place a small drop of glue just above the base of the lampshade (about one centimeter from the edge).
Glue one end of the yarn to the drop. Choose the one with a darker shade.
Wrap the yarn around the lampshade, making sure that each new row is snug against the previous one.
Wrap a certain height with one color. The last turns should not fit snugly to each other, but be at different distances, cover the lampshade a little chaotically (picture 1).
Use a glue gun to glue the yarn of a different shade. The new color should be on the same level as the old one (picture 2).
Wrap the yarn around the lampshade to create a two-color cut in some rows. This is necessary so that the shades have a smooth transition and a striped pattern does not come out.
When you wind the required level of yarn of the second color, make some free turns (picture 3).
Wind up the third color of the yarn, remembering to glue on the tip.
Finish wrapping the lampshade. To do this, the third yarn should go in dense rows to the edge of the lampshade, and glue the end (picture 4).
Turn the lampshade over and wind the yarn to the end.

The warm lampshade is ready!

Lampshade with roses

You will need to take the following tools and materials:

shade;
cardboard;
pieces of fabric;
green yarn;
ribbon;
glue gun;
scissors;
pencil.

Master class on how to decorate a lampshade for a table lamp with your own hands (photo of the process is attached):

Draw flower leaves on cardboard and then cut them out (picture 1).
Glue the green yarn to the edge with a glue gun (picture 2).
Wrap the yarn tightly around the leaf (picture 3).
Glue the end of the thread and make a few more leaves in the same way (picture 4).
Cut several strips from the fabric about one to two centimeters thick (picture 4).
Fold one strip in half, dripping a little glue inward along its entire length (picture 5).
Roll the strip tightly, sometimes dripping glue onto the edge so that it does not come loose (pictures 6 and 7).
Spread out the edges of the shape a little, and you get a rose (picture 8).
Make several roses of different sizes in the same way.
Gently glue the roses to the lampshade (picture 9).
Do not forget to glue the leaves under the roses in some places.

The volumetric lampshade is ready!

New ombre lampshade

To make a smooth and beautiful transition from one color to another, you need a suitable coating. To do this, it is recommended to make a lampshade with your own hands.
You will need:

lampshade frame;
plain cotton fabric (preferably white, beige or light gray);
small bath or basin;
paint (watercolor, hair, fabric, gouache and any other liquid);
glue gun.

Master class on how to make a do-it-yourself lampshade for a table lamp with an ombre effect:

Take your lampshade frame and fabric.
Turn on the glue gun.
Wrap the fabric around the shade and gently glue the edges together. Cut off the excess canvas.
Wrap the top and bottom edges inside the lampshade and glue them with a glue gun.
Fill a bowl or bath halfway with water and dilute the paint in it.
Lower the lampshade partially into the tray and pull it out.
Repeat this procedure several times, gradually reducing the dipping height. Thus, the paint will be absorbed more at different levels, creating a smooth transition of shades of the same color.
Hang the lampshade in the bathroom and let it dry.

Everything is ready!

How to make a lampshade from scratch

The previous master class described how to update a boring or outdated lampshade. But what if there is nothing to work with and there is not even a frame? Then you can easily make a lampshade with your own hands.

To do this, you need to take:

the cloth;
masking tape;
large ruler and centimeter;
pencil;
scissors;
plastic sheet (can be found in building stores or among the goods for needlework);
wire rings;
large clothespins;
PVA glue or;
glue gun;
special splitter for lamps (sold in lighting stores).

Operating procedure

Master class on how to make a new lampshade for a table lamp with your own hands:

Take a centimeter and measure the diameter of your wire rings. This will be the diameter of the lampshade.
Put a plastic sheet on the table and measure the length and width of the future lampshade on it
Cut off the marked rectangle.
Unfold the fabric with the wrong side of the fabric on the table.
Secure the edges of the fabric to keep it from moving.
Cover the plastic rectangle with a layer of PVA glue or double-sided tape.
Gently place the sticky side of the rectangle against the fabric.
Press the fabric against the sheet and flatten it.
Cut off excess fabric.
Twist the canvas.
Glue the canvas with a glue gun.
Connect the seam with clothespins and place the piece on the table.
Place a weight on top of the seam so that it does not come apart.
Wait for the part to dry.
Place the parts inside the top and bottom along the ring.
Attach a special splitter to the upper ring.
Glue the rings with a glue gun.
Attach clothespins to the edges so that the rings stick better. Leave the detail like this for a while.
Glue tape to the top and bottom of the lampshade, half of which wrap inward.
Cut a strip of fabric, fold the edges and glue to the seam.
Cut off two more strips of fabric, also turn the edges and glue them to the top and bottom of the lampshade.
Wait until all elements are dry.

The brand new lampshade is ready!

Taking on the arrangement of the interior space, it is important to think over every little thing. After all, we all subconsciously strive for comfort and it is the smallest details that can create a special atmosphere, convey the general idea, mood and character of the room. Professional designers claim, and interiors clearly prove that right choice chandeliers can not only decorate the interior of the room, but also make life brighter and more fun. Beautiful shades for chandeliers with original design... You can familiarize yourself with how to make them yourself and what materials are better for this in this article. Detailed, step by step master class, as well as a visual photo, will be a great help for you in this exciting process.

Material selection

When making a chandelier, it is difficult to single out any one material that would meet all the requirements. Each of them has its own individual characteristics and characteristics. For example, paper, which is the most simple and available material, lends itself well to transformation.

Luminaires made from shards of glass and strips of metal have a dazzling shine and beautiful appearance. Wood and fabric add warmth and comfort to the interior. Lacy lampshades are notable for their special beauty, captivating everyone at first sight.

In a word, you can make a chandelier with your own hands from anything, the main thing is to be smart in time and turn on imagination.

A paper napkin chandelier is a bold, but justified experiment

We will describe in detail in this article how in an ordinary object you can see its creative potential for creating an exclusive decorative element.

Step-by-step instructions, with a description of each action, will help you make incredibly beautiful and unique lamps from available tools, which will be a great addition to your favorite interior.

What you need to pay attention to before making a chandelier

Many are interested in how to properly make a chandelier in, and other rooms. After all, I want this element of the interior to be not only beautiful, but also functional.

On the one hand, a chandelier is a lighting device capable of providing the proper level of lighting in an apartment. Indeed, a lot depends on the choice of light in the room, including the safety of the eyes. On the other hand, I would like the ceiling structure to complement the interior design, creating a special atmosphere of warmth and comfort.

When making a chandelier, the first thing to consider is the height of the ceiling. For example, a chandelier with a bar mount is suitable for low ones. So, the ceiling will look visually higher. If the ceilings are high - 3 m and more, then it is better to make your choice in favor of a pendant lamp with a hook mount.

Lamp selection

For any room, you need to individually approach the intensity of its lighting.

A small bathroom will require 80-100 watts.
Kitchens need a minimum of 120-150 watts of lamp power.
The living room and the hall cannot do without light bulbs in the range of 150-300 W.

The number and power of lamps are calculated based on the established standards - 20 watts are required for 1 m². electricity. It is also necessary to take into account the parameters of the room, its dimensions and reflective properties.

Edison's designer lamps - look beautiful and unusual

Plafond decoration

The appearance, decor and design of the shade play an important role in the design of the chandelier. It is selected for the interior of the room, depending on the style. Crystal for classics, metal and glass for, wood will perfectly fit into country or chalet style, fabric and silk will perfectly suit Provence style.

To illuminate a room on several levels, you can additionally make wall sconces or floor lamps.

Step-by-step manufacturing workshop

You don't have to start from scratch to create a beautiful ceiling decoration. Take a look around, for sure you have a thing in your house that you have not used for a long time. And who knows, maybe it will be she who will become the main item in the manufacture. original lamp... Moreover, there are now more than enough ideas and inspirations for creativity on the Internet.

Important! It is best to start searching for the things you need from the kitchen or balcony. It is there that we store all sorts of trash that was once so necessary for us and with which, as often happens, it is so difficult to part with it later.

Spectacular mug chandelier

As strange as it may sound, but it is from dishes and other kitchen utensils that the most unusual and interesting models of lamps are obtained. For example, tea mugs are the ideal material for making a spectacular light fixture.

For work we need:

Mugs
Saucer
Drill
Porcelain drill with special hole

We make it quickly and easily

At the bottom of the mug, make a small hole for the wire with a drill, attach the electric cartridge and bring the wire out. It is advisable to close the hole with a plaster mixture.
Next, the mug must be glued to the saucer, where there should also be a hole, insert a light bulb and hang the newly made lamp in the right place.

As you can see, the original and fashionable design can be obtained from completely ordinary objects.

Mesmerizing yarn chandelier

Since this is a fairly simple product, we need a minimum of things to make it, namely:

Wire with a cross section of 4-5 mm.
Nippers
Thin thread
Multicolored yarn

Manufacturing instruction:

A ring is made of wire, the diameter of which will correspond to the future size of our chandelier. To get a perfectly even circle, you can wind it around any object that has a cylindrical shape.
We bite off the excess wire with pliers, leaving 2-3 cm in stock on each side. We tie the ends with a thin thread.
It remains to dress up our chandelier beautifully and brightly. To do this, we cut the yarn in such a way that the length of each segment is twice the height of the shade.
Alternately, on a knot, we tie the resulting strings until we hang the whole ring with them. From the same yarn, we make a fastener for a hook.

You can use such a lampshade both as a chandelier and as decorative element decorating the interior of the room.

Combining the skills of macrame and papier-mâché, you can get a stylish chandelier for the bedroom

Important! For the manufacture of such a lamp, instead of woolen yarn, you can use any other thread. The main thing is that it fits harmoniously with your interior.

Unusual teapot lamp

You will learn how to make a chandelier from an ordinary teapot on your own from this master class. Here's what we need for this handmade masterpiece:

Kettle
The wire
Electro cartridge
Metal chain

Step-by-step manufacturing guide

First of all, the bottom of the kettle is cut out. This is done in such a way that the resulting cutting edge is not sharp, otherwise it will be possible to injure yourself.
Next, an electric cartridge is fixed to the lid of the kettle, the wire of which is led out through a small hole drilled at the top.
A chain is attached to the handle of the kettle, through the links of which a wire is threaded. The lamp is ready.

Let's breathe new life into bottles

Glass bottles, especially if they are beautifully shaped, can be used to make a wonderful chandelier. Required material:

Thin rope
Flammable liquid (alcohol or gasoline)
Glass bottles (preferably colored)
Edison lamps (having a beautiful spiral)
Wire and electromagnet

Do it yourself

We wind a rope around the bottom of the bottle, having previously moistened it in a flammable liquid. Then we set it on fire and let it burst, and we begin to slowly rotate the bottle around its axis until the rope burns out to the end. After that, we lower the bottle into a container with cold water, wrap it with a towel and, with a little effort, break off the bottom.
To prevent the cut edge from being sharp, it must be sanded. To do this, it will be enough to twist the bottle in sand or fine gravel for a couple of minutes.
It remains to correctly mount the electrical cartridge, stick out the wire through the neck, screw in the light bulb. From the remaining bottles, the rest of the lampshades are made in a similar way.

This chandelier will perfectly fit into the interior made in any, especially if you hang it over the bar counter.

Decor from cans

Lamps made from cans are no less beautiful. They are made in a similar way as from bottles. The only difference is that the bottom of the jar does not need to be cut off, as clear glass is usually used for shades.

We need:

Beautiful thick-walled cans (preferably with a relief pattern)
Hammer and nails
Wire, electric socket
Spray paint
Edison lamp

How to do it right

To begin with, using a nail and a hammer, holes are filled in a circle in the lid, after which the inner part is carefully squeezed out. The diameter of the circle must match the diameter of the base in the chuck.
We insert the cartridge into the cover, mount the wire.
Next, paint the lid along with the cartridge in the color of our choice. Metallic paint with a golden overflow will look best.
It remains to screw in the light bulb, close the lid and install the lamp in its proper place.

We all know what a globe is, but not everyone knows what delightful things can be made of it. For example, a nice lamp shade for a chandelier that will perfectly fit into the interior of a child's room.

Here's all we need:

the globe
Bulb
Electric chuck with retaining element

Step-by-step master class

Usually, the design of the globe is not integral, so in order to get the desired element, it is necessary to divide it into equal two parts (hemispheres).
Further, at the top of the hemisphere, you need to make a hole for the cartridge. The best way to do this is to use a drill with a crown.
The electric chuck is installed in place and securely fixed with a retaining element. Congratulations, your chandelier is ready!

Suspended horn structure

Making a unique lighting device out of deer antlers is quite a simple matter, the main thing is to have the necessary material on hand.

Such designs are famous for their special sophisticated appearance and are best suited for high-rise rooms. Such chandeliers are used in many interiors, but they look especially attractive in country, chalet or rustic style.

As a rule, the shades of such chandeliers have different shapes, and only natural material is used for their manufacture.

We will need:

Antler
Rope
Copper wire
Electric socket and wire
Bulb

To make a chandelier like this

Observing the safety rules, according to the diagram, we connect the wire to the electric cartridge.
Next, the wire needs to be beautifully wrapped with a decorative rope. For better fixation, you can use an all-purpose transparent adhesive.
With the help of copper wire, horns are attached to the bottom of the resulting rope, placing them 2 cm above the cartridge.
We repeat a similar procedure with the rest of the shades, then combining them into a single composition.

Ideas for making beautiful lamps (photo, video)

Hope that useful tips and the photos presented in the article will help you not only make beautiful shades for chandeliers with your own hands, but also save your family budget.

It is not always possible to find an offer of lamps in stores that meets our needs. Often an old lamp takes on a rather unsightly look, and it is a pity to throw it away. Why not try to design your own lighting and make your own lampshade for a table lamp?

Where to start, where to find inspiration? What materials are needed? You will find answers to these questions and some interesting master classes in this article.

DIY paper lampshade for a table lamp

Lamps with a paper lampshade do not belong to products that are made exclusively by folk craftsmen. Similar lamp caps are sold in many stores that sell lighting and furniture for home interior... Their price, as a rule, differs significantly from the cost of production. For this reason, many people decide to purchase cardboard, paper, and make them on their own. How to make a do-it-yourself paper lamp shade for a lamp?

Paper selection

The paper lampshade can take many forms and can be used in different styles of interiors. What kind of paper to buy?

For manufacturing, it is necessary to purchase sufficiently high-quality and suitable paper, since the durability of the product directly depends on this.
Paper cannot be thin like regular paper, as this will quickly deteriorate the product.
She must let light through.

The best option would be a rice paper hat. This material, despite its small thickness, is very durable. Rice paper is sold in sheets of various sizes. For example, a sheet with a colored pattern can be 50 x 70 cm in size.

Rice paper

Rice paper can be glued to an old light fixture, giving it a new look. You can also delete old stuff and wrap new metal carcass... Sometimes the paper is additionally decorated with special stamps. This allows you to add additional decor for plain paper.

White paper lampshades are not only a tribute to the Far East, they are perfect for a Scandinavian-style interior. Almost wherever muted colors dominate, natural materials, you can safely use such solutions.

From wallpaper

One more interesting idea, which does not require practically any financial costs - a lampshade from wallpaper for a floor lamp or a table lamp. The most popular option is accordion-folded paper. For this purpose, the wallpaper left over from a recent renovation will be useful, such an element of the interior will perfectly match the walls. If there is no wallpaper, you can always buy a roll of leftovers; large stores usually offer favorable discounts for such products. Wallpaper can be used to make a lampshade for a table lamp using the existing frame, or for pendant lamps.

What you need:

a piece of wallpaper;
ruler;
pen;
hole puncher;
lace.

How to make a lampshade from wallpaper - master class

This is a simple solution that even a child can handle.

DIY plafond from mesh

V modern apartment, decorated in an industrial style, as well as in the garden, a lamp made of metal mesh and wire will show itself perfectly.

The mesh can be formed in any shape you like and the ends can be connected, for example, with a thin wire.

Then, using a wire, the mesh is attached to the top of the cable with the light bulb.

The shape of the lampshade is usually reduced to a ball or ellipse, but you can make any option, for example, a parallelepiped. To obtain this shape, you must use a frame made of durable wire or thick cardboard. The lampshade can be supplemented with artificial flowers, intertwined with colored laces. As a result, the mesh loses its harsh minimalist character and the product can be used in a different style of interior.

Lace

Lamps with lace lampshades add lightness and elegance to the interior. Depending on the type of lace, they allow you to get diffused or bright light. This lamp is suitable for:

living rooms,
bedrooms,
children's rooms.

The main material required for the manufacture of the case is lace. However, due to the relatively high price, lace can be replaced, for example:

unused lace napkins;
a piece of lace fabric;
leftovers from curtains tulle for windows.

The lace should be cut into circles, squares or stripes. The most time-consuming process is gluing the individual elements with glue. You can use regular wallpaper glue.

The lampshade for the chandelier, made of lace, created with your own hand using a crochet hook and a thin thread, looks very romantic. Such a product will decorate the room of needlewomen, and will be an excellent demonstration of the skill of the needlewoman.

From beads

In this case, beads are used instead of paper and fabric. The glamorous lamp shade obtained from beads lets in a lot of light. Its implementation is simple, and the end result is absolutely amazing.

You will need:

frame for the lampshade,
fishing line,
beads.

Work order

Attach the end of the line to the frame.
String the beads or seed beads, making knots so that the balls do not move.
Then attach the other end to the frame and place the beaded lines about 3 cm apart.

Making a lampshade out of thread with beads can be a bit more time-consuming than making crafts out of paper or lace, but the unique and impressive decorative effect more than makes up for it.

Thus, there are many interesting ways how to make a lampshade with your own hands. Using the above recommendations, you can refuse to buy an expensive, unoriginal lamp and replenish the interior with a unique decor item own production.

Master class for making a lampshade at home - video