A mirror, which from time immemorial has been a symbol of wealth, is an irreplaceable piece of furniture today. And really, how to do without it? After all, the mirror allows you to visually expand the room, bring more light into the room. It gives its owner the opportunity to look at himself from the outside. But why, then, more and more people are looking for ways to get rid of this piece of furniture? Is a mirror always appropriate? Let's try to figure it out and find ways to solve the problems that have arisen.
Myths about mirrors
The most common reason why people seek to rid their homes of mirrors is various mystical legends that originate from the "door to another world" to the source of "energy absorption."
So, for example, when a person sleeps, his soul temporarily leaves the body. And if there is a mirror in the bedroom, then the soul can accidentally get lost and go on a journey through parallel worlds, where the reflective surface will pass it. In other words, a person sleeping in front of a mirror runs the risk of being soulless.
It is worth mentioning that in ancient times this did not apply to women, especially redheads, because they were believed to have no soul.
Also, many believe that children under one year old and close cannot come to the mirror - it can jinx it.
In addition to bringing everyday troubles, there is a legend according to which a mirror is a portal connecting the past, present and future. That is, with a strong desire, you can go on a journey in time and ... not return. Find yourself between two worlds. Never find peace.
But still, these are just myths. Scientific substantiation is no less interesting than superstitions and in many ways justifies them. Even from the school course in biology, we know that a person is inclined to think out what he does not know. And in the end, instead of a complete picture of the world, there is only deception, deception of oneself.
Who knows, maybe both scientists and mystics are right?
Still, there are objective reasons to remove the mirror in certain places.
Where and why you shouldn't have mirrors
Consider cases where superstition and scientific beliefs have similar opinions.
- In the bedroom.“Losing your soul” isn't the first reason to get rid of your bedroom mirror. The fact is that when a person is asleep, the mirror creates in him the feeling of the presence of someone else in the room. Their actions, especially in the semi-darkness, are perceived as strangers. And this, one way or another, is a lot of stress. Getting enough sleep is already becoming impossible. Frustration, lethargy, unwillingness to do anything - perhaps the reason is in the mirror?
- In the nursery. Similar to the example above, a mirror can scare a child at night. The presence of this piece of furniture, where the baby is very small, is especially not recommended. Difficulty falling asleep, frequent awakening, irritable behavior during the day - this is what a mirror in the children's room entails.
- On the kitchen. These are all reflective surfaces in the cooking area. During cooking, it is better to concentrate on the process, so that your own reflection does not create a feeling of fatigue in the hostess. And according to popular beliefs, one should not waste energy, which should go to food, on a “soulless” mirror.
- In the dining room. It is believed that a mirror opposite the table with dishes is a good sign of wealth, but this is only if you do not look into it. One look - and the case was lost. And who can resist not admiring himself while eating? Moreover, from the point of view of physiology, a mirror in the dining room will not bring anything good. Looking at his reflection, a person is distracted from food, which leads to digestive problems.
So, a problem is brewing - there is a mirror where it shouldn't be. Fortunately, this question is easily solved - let's find out how.
Ways to get rid of the mirror
There are a lot of them. The best ones are presented below.
- Remove the mirror. No mirror, no problem. Sounds easy, but sometimes it can be tricky. For example, the bedroom already has a wardrobe with mirrored doors. Can't get rid of the closet now? And if the housing is rented, then what to do then?
- Vinyl sticker. A compromise solution that will not only close the mirror, but also give self-expression to your interior. We choose any color and picture according to the size of the surface and rejoice at how our house has changed. It should be noted that the sticker is made of vinyl - durable material that can withstand drops of water and grease, so this option is perfect for the kitchen.
- Chalk sticker. A kind of vinyl sticker, but I want to highlight it as a separate item, because it is specially designed for drawing on it with crayons. Just imagine how delighted a child will be if, instead of a frightening mirror, falling asleep, he looks at his own creations!
- Color the mirror. Armed with paints (acrylic, nitro, aerosol and other types), you can easily close mirror surface... And with the help of reusable stencils, the drawing takes on new patterns and becomes completely unique. The same mirrored wardrobe in the bedroom easily converts into a canvas open to your creativity.
- Stained glass. There is plenty to choose from: you can use a strict matte color without patterns, or, on the contrary, take something brighter that attracts attention. It all depends on your taste. Stained glass looks surprisingly natural on mirrors, but it is not so difficult in gluing, therefore, for lovers of aesthetics and those who want to close the mirror - this option should seem very tempting.
So, we have every reason to close some mirrors, there are ready-made solutions. Therefore, it remains only to get together and get down to business! May beauty and well-being come to your home!
There comes a time when the familiar environment is boring. I would like to change something, update the old interior, add some detail or make a good renovation. The best way to update the room, make it brighter, perhaps even increase the space, is to attach a mirror to the cabinet. You purchased new furniture, you need to glue the mirror on the cabinet door, and you do not know how to do this correctly, let's look at individual fastening methods.
The best way to update the room, make it brighter, perhaps even increase the space, is to attach a mirror to the cabinet.
Apply "liquid nails" or silicone to the mirror surface in parallel lines at regular intervals.
How to glue the mirror to the closet? How to do this work correctly? There are several ways to glue the mirror.
| Method name | Features of the method |
| Mounting double-sided tape. | This material must be chosen correctly. Scotch tape should be high-grade - 3M, foamed, its thickness should be 0.8-2 mm (to equalize irregularities). It is possible to work with it at temperatures from +10 to + 25 ° С. Anything higher or lower will not give proper grip. The consumption of the tape is 60 cm² per 1 kg of mass. |
| Usage " liquid nails»Special glue or colorless construction silicone. | There are some nuances: it is better not to glue the mirror on "liquid nails" and other products that have a characteristic odor. The substance in them can lead to deterioration of the amalgam. It is better to purchase special adhesives for the mirror - "Titan" (the most reliable tool), "Abro", "Soudal", "Bostik 2750". A very high-quality and handy way is to glue the mirror onto silicone. This is the best option. |
| Mechanical method. | Using U-shaped metal paws, plastic stops or special screws. |
You have purchased new furniture, you need to glue a mirror on the cabinet door, and do not know how to do this correctly, let's look at individual fastening methods.
Most the best option- gluing the mirror onto colorless construction silicone.
Attention! Which gluing option to choose, decide for yourself. The main thing is not to rush, to do all the work scrupulously, to approach the matter responsibly, then the mirror will be attached firmly enough and will last a long time.
How to glue the mirror to the closet?
Remove the protective stickers from the tape.
Necessary materials
Before starting work, you need to prepare the following materials: mirror, "liquid nails", glue or silicone for gluing the mirror, double sided tape, masking tape, degreasing agent.
There are several ways to glue the mirror.
Now you need to wait for the glue to dry.
Required tools
Useful tools: sandpaper, an assembly gun, pencil, ruler or tape measure. If you screw the mirror onto the mount, then you need a drill, screwdriver, screwdrivers, ordinary drills, a diamond drill (to make a hole in the mirror), a special mount for mirrors.
Which gluing option to choose, decide for yourself.
You decided not to use "liquid nails", but to attach them to the legs, then you need to make sure that they are manufactured accurately in height and, if necessary, mount the gaskets.
Fastening process: step by step instructions
So, you have stocked up with all the materials and tools, purchased a mirror of the right size. It is preferable if its back side is protected with a special film, which, if the mirror breaks, will prevent the fragments from falling off. Now let's get to work.
You can walk shallow sandpaper for better adhesion of the adhesive.
Before fixing the mirror, you need to put a soft layer, and then squeeze the mirror with your paws.
First, remove the cabinet door. To work handily, you need to place it in a horizontal position. Using a pencil on the surface, draw the marking lines. We clean the door with a degreasing agent, then the mirror. You can walk with fine emery paper for better glue adhesion. Remove all dust with a brush.
We clean the door with a degreasing agent, then the mirror.
If there are ready-made holes in the mirror, you can use special screws instead of feet.
Apply "liquid nails" or silicone to the mirror surface in parallel lines at regular intervals. Between them, for auxiliary fastening, we glue strips of double-sided tape. The best option is to glue the mirror onto colorless construction silicone. You do not need to use only scotch tape, as the mirror glued in this way may fall off after a while, especially when the room is very warm or you do work in the summer.
First, remove the cabinet door.
To prevent the glass from cracking, the mirror surface must be wetted all the time or make a side of plasticine and pour water there.
Remove the protective stickers from the tape. We fix the long edge of the mirror on the marking line. Slowly, we lower the mirror surface, trying to prevent displacement. It is better if an assistant will work with you. He will make sure that the mirror lies flat, without going beyond the applied markings. Everything, the mirror is glued. Now you need to wait for the glue to dry. Optimally, a day is allocated for this. The door can be snapped into place.
So, you have stocked up with all the materials and tools, purchased a mirror of the right size.
The mirror should be on a piece of cardboard or cloth.
You decided not to use "liquid nails", but to attach them to the legs, then you need to make sure that they are manufactured accurately in height and, if necessary, mount the gaskets. They should be close to the mirror, but without stretching. You also remove the door from the cabinet, lay it horizontally, mark where the holes for the fasteners of the legs should be, screw them on, fold them back. Before fixing the mirror, you need to put a soft layer, and then squeeze the mirror with your paws.
Useful tools: sandpaper, an assembly gun, pencil, ruler or tape measure.
Gluing a mirror on a cabinet door is not so difficult, all the work must be done very carefully.
If there are ready-made holes in the mirror, you can use special screws instead of feet. In case there are no holes, they are drilled with a diamond drill in the corners. To prevent the glass from cracking, the mirror surface must be wetted all the time or make a side of plasticine and pour water there. The mirror should be on a piece of cardboard or cloth. Plastic washers must be inserted under the screw heads.
Before starting work, you need to prepare the materials.
As a result, the interior of the room will be very transformed.
Gluing a mirror on a cabinet door is not so difficult, all the work must be done very carefully. As a result, the interior of the room will be very transformed. The mirror does not need to be rectangular or square. It can be of any original shape. It is important to fit in with the general setting.
The main thing is not to rush, to do all the work scrupulously, to approach the matter responsibly, then the mirror will be attached firmly enough and will last a long time.
The mirror does not need to be rectangular or square.
It is important to fit in with the general setting.
VIDEO: How to glue a mirror. Swinging mirrored door for furniture.
Today we meet sliding wardrobes in almost every apartment. The convenience and practicality of this type of furniture is beyond doubt, but its weak point the decor still remains. Panels and mirrors of a large area are a rather boring picture that you will certainly want to diversify.
How to decorate a wardrobe? Of course, you can order expensive doors from several panel inserts or with a photo print, but you will have to overpay a substantial amount.
We will offer you 5 inexpensive ways to decorate your closet do it yourself. What are their advantages?
Wide field for design solutions;
Saving money;
Convenient technologies that do not require special skills and a lot of time from you.
Method number 1. Large vinyl sticker
Vinyl decorative stickers for wardrobes, as a rule, are produced on a single-color German Oracal film, which greatly simplifies the selection by color. Outwardly, they look like a stylish pattern applied with paint. At the same time, you will be able to care for the cabinet in the usual way. Perhaps not to resort to strong friction. And most importantly, when you get tired of one drawing on the door of the wardrobe, you can literally remove the sticker in just a minute without any traces and apply a new one.
This method is universal and can be used for doors made of any materials. You can safely apply the sticker to glass and mirrors of sliding wardrobes. They hold up well and look very impressive. At the same time, you get rid of intrusive reflection, and the fingerprints that constantly appear on the glass surface will cease to be too noticeable.
The procedure for applying a large sticker on the door of the chafa-compartment:
- Training . Clean the surface from dust, fingerprints and other dirt;
- Smoothing. Spread the sticker on a flat surface and smooth it with a squeegee (smoothing spatula), which our store always sends in the kit;
- Fitting. Place the drawing on the door and mark the corner points with a pencil or erasable felt-tip pen. For accuracy, we recommend sticking the sticker with a backing on masking tape and seeing from a distance how the drawing will look.
- Substrate removal and application ... Since the sticker is large, remove the backing directly from the tape fixed to the tape from top to bottom in small pieces. Apply the released pattern immediately to the surface and gently, without excessive pressure, smooth it with a squeegee. And so on to the very bottom. Remove the transparent mounting tape in parallel from top to bottom. The work should be done slowly and carefully. Smooth everything thoroughly, even the smallest bubbles. It is most convenient to apply non-glues on the doors of the sliding wardrobe together. If bubbles still remain, pierce them with a needle closer to the edge and remove the air with a squeegee.
- Examination. After removing the backing and mounting tape, take the time to carefully look at how each element adhered. Even for a small flower, all the edges should adhere exactly to the surface.
Here's how to apply large vinyl decals to surfaces:
Helpful Hint: When applying the sticker to the mirror or glass of the wardrobe, spray the surface with water. The sticker will be easier to iron out.
Method number 2: Decorating wardrobe doors with corner patterns
If you do not want to glue the entire door surface, we recommend using vinyl decals with elegant corner patterns. Here you will get additional benefits:
Corner patterns are smaller, respectively, the sticker will be cheaper;
Small elements are much easier and faster to apply;
By decorating the corners, you let the mirror serve you like a mirror.
When applying a small vinyl decal, we recommend that you first remove backing... Put her on flat surface pattern down, pick up one of the corners and carefully shoot at an acute angle. If something sticks to the backing, put the area back in place, iron it again with a squeegee and try to remove it further. The sticker must remain on the transparent film with the adhesive side up.
At applyingstickers grab the upper corners of the mounting film and stick, smoothing from top to bottom along the marking lines. It is good if a second person helps you to support the sticker from below so that it does not stick ahead of time.
Method number 3 Decor of the wardrobe with full-color posters
Sliding wardrobe doors with photo printing are not cheap pleasure. Vinyl-based colored posters are much more affordable and often look much better. This is achieved through High Quality print. You can stick a poster on one of the doors or make a composition on all the panels of the wardrobe.
Drawings on color posters can be very diverse: from abstract figures to your own photographs with memorable places. Apply them as normal vinyl decals.
Method number 4 Sliding wardrobe with stained-glass windows - economy option
Only very wealthy people have the opportunity to decorate the doors of the wardrobe with stained glass windows. We offer a method of decoration that will allow you to experience all the delights of stained glass decoration without significant costs.
The technology is extremely simple. A translucent stained glass film with an adhesive surface is applied to the mirrored door of the sliding wardrobe. The film transmits light, which returns to us through reflection. The result is a glowing effect similar to that of colored glass. Applying stained glass to a wardrobe mirror is as easy as applying a regular vinyl sticker. Appreciate the decorative effect.
Available for order
Method number 5 Matting glass and mirrors with paste or aerosol
The frosted drawings on the mirrors and glass of the wardrobe look very noble and elegant. Matting is a technology that allows you to give a smooth glass surface roughness and opacity. For this, a special chemical composition is applied.
Matting, as a rule, is made to order and is quite expensive. We want to tell you how to make this spectacular decor for a wardrobe with your own hands.
You will need:
- Disposable (adhesive) or reusable stencil for wardrobe;
- Matting paste or spray;
- Spatula for applying the paste.
The procedure for performing work on matting glass and mirror doors:
- Clean the surface from dust and grease with alcohol or glass cleaner.
- Attach the stencil to it. Disposable adhesive is applied using the vinyl sticker method. Reusable, fixed with temporary spray adhesive. Make sure that the contours of the pattern are securely fixed.
- A thin layer of paste is applied to open areas with a spatula or a special matting aerosol is sprayed. After the expiration of the time indicated on the packaging for the composition, the undried excess of the paste is removed with a spatula, and the stencil is removed.
So in a simple way even complex designs with small details can be applied to the doors of the wardrobe.
Video about stenciling mirrors with paste and aerosol
We hope that the proposed 5 methods will help you easily choose how to decorate the doors of the sliding wardrobe at no extra cost.
Stained-glass films of the "Crystal Frost" series are perfect for decorating mirrors of wardrobes, glass doors and partitions, shower. An exquisite translucent pattern will make the glass surface attractive and open up the possibilities for zoning the space.
Available for order several surface patterns
Specialization: Master in Construction plasterboard structures, finishing works and styling floor coverings... Installation of door and window blocks, decoration of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.
Gluing mirrors on pieces of furniture is a simple, but responsible process. If you make mistakes and do everything wrong, then over time the mirror will begin to move from its place or even fall down and break. In the review, we will figure out how to carry out the work reliably and with high quality, you will learn several ways and you will be able to choose the one that best suits your situation.
Types of fastening methods
First of all, let's figure out what methods can be used to fix the mirrors. All of them have proven their reliability, but at the same time, the technology of work is different and is used for certain situations.
Mounting double-sided tape
The simplest solution that has the following advantages:
- Double-sided tape allows you to glue the elements very quickly... It holds mirrors, glass, and other sheet materials equally reliably. To understand the technology, you will need a couple of minutes, and for work, the simplest set of devices is used, which is found in almost every house and apartment;
- The cost of this option is low, but if quality is important to you, we recommend purchasing materials not from the budget, but at least from the middle price segment. When choosing a specific solution, remember that the material must have a soft spacer; ordinary office tape will not work, since it is not designed for high loads;
- It is not difficult to buy scotch tape. It is sold in building stores, as well as in retail outlets that deal with car parts. The second option is even preferable, since automobile double-sided tapes are characterized by increased strength and durability;
It is best to select a double-sided tape with a thickness of 0.8 to 2 mm, it will smooth out small irregularities and provide high adhesion to the surface. Of the manufacturers, 3M products have proven themselves best; this is the option that professionals recommend.
- It is best to glue the elements at a temperature of 10 to 25 degrees., it is this range that provides a solid hold. Most often, the room has an optimal microclimate, so there are no problems with this aspect, but if the room is very hot, then it is better to wait until the temperature drops so that the adhesive layer on the tape does not go off and the mirror does not move;
- Easily calculate the required amount of material... Before gluing the elements, the amount of tape required for work is calculated. To do this, you must know the total weight of the mirror, 60 cm2 is used for 1 kilogram of mass. double-sided tape;
- The possibility of dismantling the elements... If the mirror is glued on crookedly, then you can remove it and redo the work. For this, a guitar string or thin polystyrene tape is used, which is used to cut the foamed part of double-sided tape. After that, all remnants of the old material are removed and a new one is glued on.
Among the disadvantages are the following:
- Double-sided tape is not suitable for heavy mirrors... If the size of the element is large and the weight is significant, then it is better to choose a different mounting method. This option is optimal for small mirrors;
- It is important to purchase quality material... There are many low-quality tapes on the market that do not provide the proper level of strength.
Special compounds and liquid nails
The most popular option that allows mirrors to be glued to any surface:
- Chipboard and chipboard;
- Tiles in the bathroom or kitchen;
- Wooden and veneered bases;
- Plaster, concrete and plastered surface.
Since we understand how to stick mirrors on furniture, we will analyze this option in more detail. Let's start with the pros:
- Low cost... The price of the compositions is low, and they are sold in all hardware stores;
- A wide variety of options... Various solutions are used - from special compounds to liquid nails and silicone for glass. It is best to use silicone, since liquid nails contain ammonia, which over time can damage the mirror amalgam and stains appear on the surface;
- High reliability... If the elements are fastened using technology, then the fixing strength will be ideal. Below is a detailed workflow so that you can do the gluing yourself.
Of the minuses, it is worth noting the following:
- Impossibility to dismantle... After the composition has frozen, it will no longer be possible to separate the mirror from the cabinet door or panel in the hallway. You will have to change the entire element, and this is a big cost;
- The importance of doing the job correctly... If the technology is violated, then there is a danger that the mirror will simply fall off over time. In addition, if the wrong composition is used, the mirror may deteriorate over time.
Mechanical fastening method
In this case, special fasteners are used, which are designed to install mirrors on furniture. There are several basic options:
- Metal bracket... The simplest and cheapest solution is metal elements bent so that a mirror of a certain thickness fits into them. So that when fastening from excessive force cracks do not form on the surface, silicone gaskets are placed under the lower part;
- Pass-through holders - allow mirrors to be attached to any surface... From the outside, the installation site is covered with a decorative part, and inside there is a self-tapping screw or a dowel, depending on where the installation is being made. This option is more difficult in that you need to drill glass, and this is not an easy task, moreover, you will need a special drill;
- Furniture fasteners with decorative overlays. Most often it is done in the form of clamps that hold the mirror from above and below, and from the outside, the installation site is closed with a decorative plug of any color and shape. With this option, you can hang the mirror anywhere;
The advantages of this solution are as follows:
- This is a safe mounting option... There is no need to worry that the mirror will slip over time;
- You can dismantle the element... If the mirror is damaged, then it will not be difficult to replace it, the fasteners can be turned off quickly and easily;
- Lots of options... Finding the best one is not difficult.
There are also disadvantages:
- Complexity of installation... Attaching requires a screwdriver to drill holes and tighten screws. If you made a mistake with the place of drilling, then it will not be possible to close the hole, the top film of the coating will be damaged;
- Not very attractive view... Stubs don't always fit into the design, and this is the main problem.
How to glue a mirror to a cabinet door yourself
We will look at how to glue the element to silicone, since this is the simplest and at the same time reliable option. This method is suitable for any structures, the main thing is to carry out the work correctly and use high-quality materials.
Materials for work
First of all, collect everything you need:
- Special silicone for glass and mirrors... It is sold in hardware stores and differs in that it does not contain substances that damage the amalgam of mirrors. In addition, the compositions of this group have high adhesion to smooth surfaces;
If you find liquid nails that are labeled “for mirrors,” you can use those as well.
- Composition for degreasing surfaces... The easiest way to remove traces of grease and other substances from furniture and the back of mirrors is with White Spirit or another universal solvent. You can also use special automotive compositions for degreasing, they are more expensive, but almost odorless;
- The mirror is the correct size. Take measurements in advance and order the element ready-made, the ends will be processed in it, which is very important for safety.
Tool
The mirror is fixed using the following devices:
- Sealant gun... With its help, the work will take place quickly and efficiently and the consumption of the composition will be minimal. The cheapest option will do, since the workloads on the tool will be low;
- Measuring tool... A construction tape or ruler is used to pinpoint the location of the mirror. And for marking it is best to use a construction pencil or felt-tip pen;
- Rags for degreasing surfaces... Any clean cloth will do;
- Screwdriver or screwdriver... If the mirror is placed on the door in the cabinet, then it is better to remove it, since it should lie horizontally;
- Heavy objects... To press the glass to the surface of the furniture, weights are placed on it. You can use improvised items or even ordinary cans in which water is poured.
Fastening process: step by step instructions
Let's figure out how to attach a mirror with our own hands:
| Illustration | Description |
 |
Being prepared workplace ... It is best to make a flooring on which a door or other piece of furniture is laid, on which a mirror will be glued, it can be placed next to it, if there is enough space. |
 |
The cabinet door is being prepared, the following actions are performed:
|
 |
Preparing a mirror... To do this, turn the element face down and wipe it thoroughly with the same cloth soaked in solvent.
|
Loading ...